Janome MB-4 manual Formatting the memory, Resetting all to defaults, Maximum sewing speed

Page 61

04

NO

05

NO

06

600

07

1

[04]Formatting the memory

If the internal memory does not function due to damage to the memory bank, you need to re-enable it by formatting the memory.

Press the right arrow button to indicate [YES]. Press the ENTER button to format the memory. If you do not wish to format, press the left arrow button to change the indication to [NO].

Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

[05]Resetting all to defaults

All the parameters in the My setting mode can be reset to the original values (factory setting).

Press the right arrow button to indicate [YES]. Press the ENTER button to reset the settings to defaults. If you do not wish to format, press the left arrow button to change the indication to [NO]. Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

[06]Maximum sewing speed

The maximum sewing speed can be set from 400 to 800 spm by 100 spm increments.

Press the right or left arrow button to alter the sewing speed.

Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

[07]Thread selection

There are 6 brands of thread to choose from.

Press the right or left arrow button to select the brand number. The color code of the selected brand will be shown in the Ready to sew mode display.

The brand numbers are as follows:

1Janome

2Gütermann Sulky (rayon 40)

3Madeira (polyester 40)

4Mettler (Poly Sheen)

5Robison-Anton (polyester 40)

6Robison-Anton (rayon 409)

Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

58

Image 61

Contents Instruction Book Important Safety Instructions Grounding Instructions Table of Contents Installing the Machine Setting UP the MachineRemoving the Head Stoppers Adjusting the feetPage Names of Parts RCS unit optional item Sub control panelOptional RCS unit Standard AccessoriesStandard Accessories Assembling the Spool Stand Setting the thread cone Setting the Thread Cones or Spools of ThreadSetting the spool of thread Installing the Hoop Supporter Installing the RCS Unit optional item Grounding Instructions Connecting the Power SupplyDirect PC-Link Needles Bobbin ThreadsStabilizers Winding the Bobbin Inserting the bobbin Removing the bobbin caseInserting the bobbin case Threading needle No.1 Threading the Needle⁄22 Threading the needle with the needle threader Setting the Fabric in the Embroidery Hoop Adjusting the Hoop Supporter for Optional Hoops Setting the Embroidery HoopLCD brightness adjusting dial Mode buttonMachine operating buttons Start/Stop buttonLCD screen Y uStitch count setting Machine SettingsColor section layer setting Needle bar number settingStarting to Embroider N1253 N2224HM1 ? M1 02010 02/13 Removing the Hoop Adjusting the needle thread tension Adjusting the Thread TensionAdjusting the bobbin thread tension Tension is too tightChecking the needle Replacing the NeedleReplacing the needle Basic Operation of the Optional RCS Unit Menu key Function keysFile open key SET keyOn-screen Help Movie Disconnecting the RCS Unit Selecting the Embroidery Patterns Advanced Operation with the Optional RCS UnitSelecting the built-in designs Color list option Function keys circle keysAutomatic color assignment Manual color assignment Monogramming Lettering orientation Function keys Font selectionLetter size Letter caseSaving the monogram Entering the charactersTo insert a character Correcting the text To delete a characterHorizontal orientation Placement of monogrammingVertical orientation Multi-color monogramming Editing Selecting the hoop Editing FunctionsMoving the pattern Resizing the patternDeleting the pattern Rotating the patternSaving the file Flipping the pattern Duplicating the patternMonogramming in an arc To customize the colors of the pattern image Customizing the color settingCombining the Patterns and Lettering ⁄2 Edit Bright Blue Trac Outline M2126X110mm Eco mode setting Customizing the Setting with the Sub Control PanelBuzzer sound control Machine ID numberFormatting the memory Resetting all to defaultsMaximum sewing speed Thread selectionSetting the thread detector sensitivity Setting the trim tail lengthReminder message ON/OFF Ignoring short stitchesJump thread trimming threshold Jump thread trimming ON/OFFLCD brightness adjustment Customizing the Settings with the Optional RCS UnitInch/mm option Touch screen calibration Screen saverMachine ID and name Yes ⁄2Maximum sewing speed ⁄1Grid size⁄3Hoop selection for monogramming ⁄5Screen color options ⁄4Selecting the thread brand⁄7Reserving the color for the needle bar ⁄6Reminder message ON/OFF⁄8Ignoring short stitches ¤0Setting the thread detector sensitivity ⁄9Setting the trim tail length¤2Setting the number of jumps for trimming ¤1Jump thread trimming ON/OFF¤3Language selection Saving the Pattern as a File File ManagementCreating a new folder Opening a file Deleting the file Deleting the folderInserting the PC Design card PC Design CardsEjecting the PC Design card Opening the embroidery pattern from the PC Design cardOpening the embroidery pattern from the USB memory USB MemoryOpening the embroidery pattern from the CD-ROM CD-ROM DriveCleaning the Bobbin Case Cleaning the HookCleaning the Auto Thread Cutter Mechanism Oiling Audible Signals Error MessagesAudible signal Buzzer sounds when Problem Cause Reference TroubleshootingTroubleshooting