Janome MB-4 manual USB Memory, Opening the embroidery pattern from the USB memory

Page 78

q

z

q					1		2		3		4




					5		6		7		8


					9		10		11		12

	USB Memory
	The RCS unit is compatible with the USB memory,
	which can be used to save and transfer the files
	between the machine and your PC.
	The USB memory is available at camera shops, PC
	supplies stores etc. in various forms.
	Insert the USB memory into the USB port on the RCS
w	unit.
	To remove the USB memory, pull it straight away from
	the RCS unit.
	q USB memory
	w USB port

	NOTE:
	When turning the power on with the PC Design card
	inserted, it will take a few moments to start up the
	RCS unit.

Opening the embroidery pattern from the USB memory

zPress the open file key.

q Open file key

x

Location :

x Press the circle key next to the USB memory icon.

USB-Memory

RCS

0.1/3MB

w

w Circle key (USB memory)

MB-4

Card

USB-Memory

CD-ROM

c	Location :	New
	Location :	0.1/488MB
	USB Memory	0.1/488MB
	USB Memory	Rename
		Rename
	Embf

e

cThe folder list window will open. Press the Embf folder icon to open.

e Folder icon

The file list window will open. Press the desired file icon to open.

Refer to pages 70-73 for how to save and open the file.

75

Image 78

Contents Instruction Book Important Safety Instructions Grounding Instructions Table of Contents Setting UP the Machine Installing the MachineAdjusting the feet Removing the Head StoppersPage Names of Parts Sub control panel RCS unit optional itemStandard Accessories Optional RCS unitStandard Accessories Assembling the Spool Stand Setting the Thread Cones or Spools of Thread Setting the thread coneSetting the spool of thread Installing the Hoop Supporter Installing the RCS Unit optional item Connecting the Power Supply Grounding InstructionsDirect PC-Link Bobbin Threads NeedlesStabilizers Winding the Bobbin Removing the bobbin case Inserting the bobbinInserting the bobbin case Threading the Needle Threading needle No.1⁄22 Threading the needle with the needle threader Setting the Fabric in the Embroidery Hoop Setting the Embroidery Hoop Adjusting the Hoop Supporter for Optional HoopsMachine operating buttons Mode buttonLCD brightness adjusting dial Start/Stop buttonY u LCD screenColor section layer setting Machine SettingsStitch count setting Needle bar number settingN1253 N2224 Starting to EmbroiderHM1 ? M1 02010 02/13 Removing the Hoop Adjusting the bobbin thread tension Adjusting the Thread TensionAdjusting the needle thread tension Tension is too tightReplacing the Needle Checking the needleReplacing the needle Basic Operation of the Optional RCS Unit File open key Function keysMenu key SET keyOn-screen Help Movie Disconnecting the RCS Unit Advanced Operation with the Optional RCS Unit Selecting the Embroidery PatternsSelecting the built-in designs Function keys circle keys Color list optionAutomatic color assignment Manual color assignment Monogramming Letter size Function keys Font selectionLettering orientation Letter caseEntering the characters Saving the monogramCorrecting the text To delete a character To insert a characterPlacement of monogramming Horizontal orientationVertical orientation Multi-color monogramming Editing Moving the pattern Editing FunctionsSelecting the hoop Resizing the patternRotating the pattern Deleting the patternSaving the file Duplicating the pattern Flipping the patternMonogramming in an arc Customizing the color setting To customize the colors of the pattern imageCombining the Patterns and Lettering ⁄2 Edit Bright Blue Trac Outline M2126X110mm Buzzer sound control Customizing the Setting with the Sub Control PanelEco mode setting Machine ID numberMaximum sewing speed Resetting all to defaultsFormatting the memory Thread selectionReminder message ON/OFF Setting the trim tail lengthSetting the thread detector sensitivity Ignoring short stitchesJump thread trimming ON/OFF Jump thread trimming thresholdCustomizing the Settings with the Optional RCS Unit LCD brightness adjustmentInch/mm option Screen saver Touch screen calibrationMachine ID and name Yes ⁄1Grid size ⁄2Maximum sewing speed⁄3Hoop selection for monogramming ⁄4Selecting the thread brand ⁄5Screen color options⁄6Reminder message ON/OFF ⁄7Reserving the color for the needle bar⁄8Ignoring short stitches ¤2Setting the number of jumps for trimming ⁄9Setting the trim tail length¤0Setting the thread detector sensitivity ¤1Jump thread trimming ON/OFF¤3Language selection File Management Saving the Pattern as a FileCreating a new folder Opening a file Deleting the folder Deleting the fileEjecting the PC Design card PC Design CardsInserting the PC Design card Opening the embroidery pattern from the PC Design cardUSB Memory Opening the embroidery pattern from the USB memoryCD-ROM Drive Opening the embroidery pattern from the CD-ROMCleaning the Hook Cleaning the Bobbin CaseCleaning the Auto Thread Cutter Mechanism Oiling Error Messages Audible SignalsAudible signal Buzzer sounds when Troubleshooting Problem Cause ReferenceTroubleshooting