Multiquip HTN-27K-TCSL operation manual Maintenance Safety, Emergencies

Page 13

HTN-SERIES — RULES FOR SAFE OPERATION

Maintenance Safety

ALWAYS shut down the engine and disconnect battery before performing service or maintenance functions. Contact with moving parts can cause serious injury.

Securely support any trowel components that must be raised.

NEVER lubricate components or attempt service on a running trowel.

ALWAYS allow the trowel a proper amount of time to cool before servicing.

Keep the trowel in proper running condition.

Make sure that there is no buildup of concrete, grease, oil or debris on the machine.

Repair damage to the trowel immediately and always replace broken parts.

Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

DO NOT use plastic food containers to dispose of hazardous waste.

DO NOT pour waste oil or fuel directly onto the ground, down a drain or into any water source.

NEVER store trowel with fuel in the tank for any extended period of time. Always clean up spilled fuel immediately.

Emergencies

ALWAYS know the location of the nearest fire extinguisher.

ALWAYS know the location of the nearest first aid kit.

Know the phone numbers of the nearest ambulance, doctor and fire department. Ensure that a phone or radio is readily available at the jobsite. If this is not possible, know the location of the nearest phone. This information will be invaluable in the event of an emergency.

HTN- SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (06/06/07) — PAGE 13

Image 13 Contents
Model HTN-27K-TCSL Model HTN-28K-TCSL Page Silicosis Warning Table of Contents Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlyTraining Checklist Training ChecklistMachine layout, location of components, checking of engine Daily PRE-OPERATION Checklist Daily PRE-OPERATION ChecklistYou can be Injured if you do not follow these directions HTN-SERIES Safety Message Alert Symbols Always wear approved eye and hearing protection Always wear approved respiratory protectionDo not operate or service this equipment SafetyRules for Safe Operation Fatigue, illness or taking medicineLifting the Ride-On Trowel Always keep the work area well organizedBattery Towing Safety PrecautionsHTN-SERIES Rules for Safe Operation TransportingEmergencies Maintenance SafetyAlways know the location of the nearest first aid kit Machine Safety Decals HTN-SERIES Operation and Safety DecalsHTN-SERIES- Specifications Trowel HTN-Series Engine Specifications HTN-SERIES- Specifications EngineHTN-SERIES General Information HTN Series Ride-On PowerTrowel FamiliarizationEngine Blades HTN-SERIES Controls and Indicators HTN-SERIES Controls and Indicators Kohler 28 HP Engine Kohler 27 HP Engine HTN-SERIES Basic EngineInitial Servicing Control Handle Assembly Trowel Pre-Set Up InstructionsSeat Assembly Battery SetupEngine Oil Level Always check engine oil Before Each USE HTN-SERIES Initial START-UPGearbox Oil Level Fuel Gauge Important Information Before You Start HTN-SERIES OperationSteering HTN-SERIES OperationMaintenance Schedule HTN-SERIES MaintenanceAir Cleaner Daily HTN-SERIES MaintenanceReinstall the air cleaner cover and secure the latches Disassembly and Reassembly Standard Type Air Cleaner Components to CheckMake sure the cooling shrouds are reinstalled Make sure the correct depth airOil Filter 100 Hours Changing Engine Oil And FilterFuel Filter 200 Hours Oil And Fuel LinesRemoving the Drive Belt Checking The Drive BeltHave a 3/4 X 1 X 3-1/4 inch wooden block available Reinstall the spare belt carrier and the drive belt guard HTN-SERIES- MaintenanceInstalling the Drive Belt Using Replacement Drive Belt Wooden BlockSpare Drive Belt Replacement HTN-SERIES- MaintenanceTorque Converter/Variable Pitch Pulley Drive Pulley Drive System Theory of OperationClutch How It Works Figure Condition a z Engine IdlingBlade Pitch Matching Blade Pitch for Both Sets of BladesStabilizer Ring Removal Trowel Arm adjustment ProcedureRemove the trowel arm from the spider plate Trowel Arm RemovalTrowel Blade Removal Spider Plate Hex Head Bolt Zerk FittingChecking Trowel Arm Straightness Trowel Arm AdjustmentSideview Re-Assembly Trowel Arm Adjustment SetupDecommissioning Trowel/Components Installing Pans Onto Finisher BladesSymptom Possible Problem Solution HTN-SERIES -TROUBLESHOOTING Engine HTN-SERIES-TROUBLESHOOTING Trowel Troubleshooting HTN-SERIES-TROUBLESHOOTING TrowelHTN-SERIES Notes Payment Terms Page Mexico United Kingdom United StatesCanada Brazil Your Local Dealer is