Multiquip HTN-27K-TCSL HTN-SERIES Basic Engine, Kohler 28 HP Engine Kohler 27 HP Engine

Page 20

HTN-SERIES — BASIC ENGINE

2

3

8

 

 

1

7

9

10

6

5

11

4

12

 

Kohler 28 HP Engine

Kohler 27 HP Engine

 

Figure 4. Engine Controls and Components

INITIAL SERVICING

The engine must be checked for proper lubrication and the fuel tank filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions & details of operation and servicing. The engines shown above are Kohler engines.

1. Muffler – Used to reduce noise and emissions.

WARNING

Enginecomponentscangenerateextremeheat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER operate the engine with the muffler removed.

2.

Oil Filler Cap – Remove to add engine oil.

3.

Air Filter – Prevents dirt and other debris from entering the

 

fuel system. Unsnap air filter cover to gain access to filter

 

element.

4.Oil Drain Hose – Remove plug from end of hose to drain crankcase oil.

5.Oil Cooler – Helps keep engine oil cooler for longer engine life.

6.

Oil Filter – Spin-on type, filters oil for contaminants.

7.Throttle Lever – Controlled by accelerator pedal, increases or decreases engine RPM.

8. Oil Dip Stick – Remove to check amount and condition of oil in crankcase.

9.Ignition Coil – Provides spark to the ignition system.

10.Spark Plug – Provides spark to the combustion chamber. See engine owner's manual for plug type and gap settings. Clean spark plug once a week.

11.Starter – Starts engine when ignition key is rotated to the "START" position.

12.Side Oil Drain Plug (one of two) – Remove to drain crankcase oil.

HTN-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (06/06/07) — PAGE 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model HTN-27K-TCSL Model HTN-28K-TCSL Page Silicosis Warning Table of Contents Best Deal! Order via Internet Dealers Only Order via Fax Dealers OnlyMachine layout, location of components, checking of engine Training ChecklistTraining Checklist Daily PRE-OPERATION Checklist Daily PRE-OPERATION ChecklistHTN-SERIES Safety Message Alert Symbols You can be Injured if you do not follow these directionsAlways wear approved respiratory protection Always wear approved eye and hearing protectionSafety Do not operate or service this equipmentRules for Safe Operation Fatigue, illness or taking medicineAlways keep the work area well organized Lifting the Ride-On TrowelTowing Safety Precautions BatteryHTN-SERIES Rules for Safe Operation TransportingAlways know the location of the nearest first aid kit Maintenance SafetyEmergencies HTN-SERIES Operation and Safety Decals Machine Safety DecalsHTN-SERIES- Specifications Trowel HTN-SERIES- Specifications Engine HTN-Series Engine SpecificationsEngine Blades HTN Series Ride-On PowerTrowel FamiliarizationHTN-SERIES General Information HTN-SERIES Controls and Indicators HTN-SERIES Controls and Indicators Initial Servicing HTN-SERIES Basic EngineKohler 28 HP Engine Kohler 27 HP Engine Trowel Pre-Set Up Instructions Control Handle AssemblySeat Assembly Battery SetupGearbox Oil Level HTN-SERIES Initial START-UPEngine Oil Level Always check engine oil Before Each USE HTN-SERIES Operation Fuel Gauge Important Information Before You StartHTN-SERIES Operation SteeringHTN-SERIES Maintenance Maintenance ScheduleReinstall the air cleaner cover and secure the latches HTN-SERIES MaintenanceAir Cleaner Daily Air Cleaner Components to Check Disassembly and Reassembly Standard TypeMake sure the cooling shrouds are reinstalled Make sure the correct depth airChanging Engine Oil And Filter Oil Filter 100 HoursFuel Filter 200 Hours Oil And Fuel LinesHave a 3/4 X 1 X 3-1/4 inch wooden block available Checking The Drive BeltRemoving the Drive Belt HTN-SERIES- Maintenance Reinstall the spare belt carrier and the drive belt guardInstalling the Drive Belt Using Replacement Drive Belt Wooden BlockHTN-SERIES- Maintenance Spare Drive Belt ReplacementDrive System Theory of Operation Torque Converter/Variable Pitch Pulley Drive PulleyHow It Works Figure Condition a z Engine Idling ClutchBlade Pitch Matching Blade Pitch for Both Sets of BladesTrowel Arm adjustment Procedure Stabilizer Ring RemovalTrowel Arm Removal Remove the trowel arm from the spider plateTrowel Blade Removal Spider Plate Hex Head Bolt Zerk FittingSideview Trowel Arm AdjustmentChecking Trowel Arm Straightness Trowel Arm Adjustment Setup Re-AssemblyInstalling Pans Onto Finisher Blades Decommissioning Trowel/ComponentsSymptom Possible Problem Solution HTN-SERIES -TROUBLESHOOTING Engine HTN-SERIES-TROUBLESHOOTING Trowel HTN-SERIES-TROUBLESHOOTING Trowel TroubleshootingHTN-SERIES Notes Payment Terms Page United States Mexico United KingdomCanada Brazil Your Local Dealer is

HTN-27K-TCSL specifications

The Multiquip HTN-27K-TCSL is a cutting-edge piece of technology designed for professionals in the construction and industrial sectors. This portable hydraulic power unit is known for its robust performance and versatility, making it an ideal choice for a wide range of applications.

One of the standout features of the HTN-27K-TCSL is its powerful engine. Equipped with a reliable 27-horsepower Kohler engine, this unit ensures maximum efficiency and performance, allowing operators to complete tasks quickly and effectively. The engine is designed to be both fuel-efficient and environmentally friendly, adhering to emission regulations without sacrificing power.

The HTN-27K-TCSL boasts a unique hydraulic system that delivers high-pressure flow rates, making it suitable for operating multiple tools simultaneously. With a maximum hydraulic pressure of 3,000 PSI, this power unit can effortlessly handle demanding tasks such as concrete breaking, water jetting, and other heavy-duty applications. The ability to provide consistent hydraulic power allows for enhanced productivity on job sites.

In terms of versatility, the Multiquip HTN-27K-TCSL is equipped with a wide range of output options. Its hydraulic outlet configurations can support various attachments, enabling users to adapt the unit for diverse tasks. This flexibility makes it an invaluable tool for contractors, landscapers, and utility companies.

Another notable characteristic of the HTN-27K-TCSL is its rugged construction. Built to withstand the rigors of tough job sites, this hydraulic power unit features a durable frame and protective covers that shield the engine and components from dust and debris. The compact design ensures easy transportation and maneuverability, making it a practical choice for both indoor and outdoor use.

Additionally, the HTN-27K-TCSL is designed with operator safety in mind. It features a user-friendly interface, with clearly labeled controls for easy operation. Safety features such as emergency shut-off switches and protective guards further enhance its usability, ensuring that operators can work confidently.

In summary, the Multiquip HTN-27K-TCSL is a powerful, versatile, and robust hydraulic power unit designed to meet the demanding needs of various industries. With its exceptional performance, durable construction, and focus on safety, it continues to be a trusted choice among professionals seeking reliable hydraulic solutions.
Top Page Image Contents