Multiquip HTN-27K-TCSL operation manual Symptom Possible Problem Solution

Page 39

HTN-SERIES —TROUBLESHOOTING (ENGINE)

TABLE 5. ENGINE TROUBLESHOOTING

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

 

 

 

 

 

 

 

Fuel tank is empty.

Fill fuel tank.

 

 

 

 

Shut-off valve is closed.

Open fuel shut-off valve.

 

 

 

 

Fuel line has suction leak or

Check fuel line condition and fuel line clamps.

 

is restricted. Fuel filter, or fuel

Ensure that fuel line is not kinked. Check fuel filter

 

tank cap vent is obstructed.

for restriction and replace if necessary. Check fuel

 

 

cap vent and clean or replace as necessary.

 

 

 

 

Fuel supply is contaminated.

Drain and clean fuel tank, clean tank and refill with

Engine Cranks But

 

fuel.

 

 

Will Not Start

If carbureted, carburetor is

Apply recommended amount of choke for cold and

 

 

underchoked or overchoked.

warm weather.

 

 

 

 

Spark plug is fouled,

Check spark plug for fouling, check gap, and

 

improperly gapped, or

inspect for damage. Clean or replace spark plug

 

damaged. Spark plug leads

as necessary. Reattach spark plug leads if

 

disconnected.

disconnected.

 

 

 

 

Safety stop switch

Ensure that the Safety Stop Switch is functioning

 

malfuntion.

when the operator is seated; replace switch if

 

 

necessary.

 

 

 

 

Fuel tank is empty.

Fill fuel tank.

 

 

 

 

Shut-off valve is closed.

Open fuel shut-off valve.

 

 

 

Engine Starts But

Fuel line has suction leak or

Check fuel line condition and fuel line clamps.

Will Not Continue

is restricted. Fuel filter is

Ensure that fuel line is not kinked. Check fuel filter

obstructed, or fuel tank cap

for restriction and replace if necessary. Check fuel

Running

vent is blocked.

cap vent and clean or replace as necessary.

 

 

 

 

 

If engine is carbureted,

Apply recommended amount of choke for cold and

 

carburetor is underchoked or

warm weather.

 

over choked.

 

 

 

 

 

Faulty ignition switch or

Replace defective switch or starter.

 

starter.

 

 

 

 

 

Engine is seized.

Repair or replace engine.

 

 

 

HTN- SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (06/06/07) — PAGE 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Model HTN-27K-TCSL Model HTN-28K-TCSL Page Silicosis Warning Table of Contents Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlyTraining Checklist Training ChecklistMachine layout, location of components, checking of engine Daily PRE-OPERATION Checklist Daily PRE-OPERATION ChecklistYou can be Injured if you do not follow these directions HTN-SERIES Safety Message Alert SymbolsAlways wear approved eye and hearing protection Always wear approved respiratory protectionFatigue, illness or taking medicine SafetyDo not operate or service this equipment Rules for Safe OperationLifting the Ride-On Trowel Always keep the work area well organizedTransporting Towing Safety PrecautionsBattery HTN-SERIES Rules for Safe OperationMaintenance Safety EmergenciesAlways know the location of the nearest first aid kit Machine Safety Decals HTN-SERIES Operation and Safety DecalsHTN-SERIES- Specifications Trowel HTN-Series Engine Specifications HTN-SERIES- Specifications EngineHTN Series Ride-On PowerTrowel Familiarization HTN-SERIES General InformationEngine Blades HTN-SERIES Controls and Indicators HTN-SERIES Controls and Indicators HTN-SERIES Basic Engine Kohler 28 HP Engine Kohler 27 HP EngineInitial Servicing Battery Setup Trowel Pre-Set Up InstructionsControl Handle Assembly Seat AssemblyHTN-SERIES Initial START-UP Engine Oil Level Always check engine oil Before Each USEGearbox Oil Level Fuel Gauge Important Information Before You Start HTN-SERIES OperationSteering HTN-SERIES OperationMaintenance Schedule HTN-SERIES MaintenanceHTN-SERIES Maintenance Air Cleaner DailyReinstall the air cleaner cover and secure the latches Make sure the correct depth air Air Cleaner Components to CheckDisassembly and Reassembly Standard Type Make sure the cooling shrouds are reinstalledOil And Fuel Lines Changing Engine Oil And FilterOil Filter 100 Hours Fuel Filter 200 HoursChecking The Drive Belt Removing the Drive BeltHave a 3/4 X 1 X 3-1/4 inch wooden block available Wooden Block HTN-SERIES- MaintenanceReinstall the spare belt carrier and the drive belt guard Installing the Drive Belt Using Replacement Drive BeltSpare Drive Belt Replacement HTN-SERIES- MaintenanceTorque Converter/Variable Pitch Pulley Drive Pulley Drive System Theory of OperationMatching Blade Pitch for Both Sets of Blades How It Works Figure Condition a z Engine IdlingClutch Blade PitchStabilizer Ring Removal Trowel Arm adjustment ProcedureSpider Plate Hex Head Bolt Zerk Fitting Trowel Arm RemovalRemove the trowel arm from the spider plate Trowel Blade RemovalTrowel Arm Adjustment Checking Trowel Arm StraightnessSideview Re-Assembly Trowel Arm Adjustment SetupDecommissioning Trowel/Components Installing Pans Onto Finisher BladesSymptom Possible Problem Solution HTN-SERIES -TROUBLESHOOTING Engine HTN-SERIES-TROUBLESHOOTING Trowel Troubleshooting HTN-SERIES-TROUBLESHOOTING TrowelHTN-SERIES Notes Payment Terms Page Your Local Dealer is United StatesMexico United Kingdom Canada Brazil

HTN-27K-TCSL specifications

The Multiquip HTN-27K-TCSL is a cutting-edge piece of technology designed for professionals in the construction and industrial sectors. This portable hydraulic power unit is known for its robust performance and versatility, making it an ideal choice for a wide range of applications.

One of the standout features of the HTN-27K-TCSL is its powerful engine. Equipped with a reliable 27-horsepower Kohler engine, this unit ensures maximum efficiency and performance, allowing operators to complete tasks quickly and effectively. The engine is designed to be both fuel-efficient and environmentally friendly, adhering to emission regulations without sacrificing power.

The HTN-27K-TCSL boasts a unique hydraulic system that delivers high-pressure flow rates, making it suitable for operating multiple tools simultaneously. With a maximum hydraulic pressure of 3,000 PSI, this power unit can effortlessly handle demanding tasks such as concrete breaking, water jetting, and other heavy-duty applications. The ability to provide consistent hydraulic power allows for enhanced productivity on job sites.

In terms of versatility, the Multiquip HTN-27K-TCSL is equipped with a wide range of output options. Its hydraulic outlet configurations can support various attachments, enabling users to adapt the unit for diverse tasks. This flexibility makes it an invaluable tool for contractors, landscapers, and utility companies.

Another notable characteristic of the HTN-27K-TCSL is its rugged construction. Built to withstand the rigors of tough job sites, this hydraulic power unit features a durable frame and protective covers that shield the engine and components from dust and debris. The compact design ensures easy transportation and maneuverability, making it a practical choice for both indoor and outdoor use.

Additionally, the HTN-27K-TCSL is designed with operator safety in mind. It features a user-friendly interface, with clearly labeled controls for easy operation. Safety features such as emergency shut-off switches and protective guards further enhance its usability, ensuring that operators can work confidently.

In summary, the Multiquip HTN-27K-TCSL is a powerful, versatile, and robust hydraulic power unit designed to meet the demanding needs of various industries. With its exceptional performance, durable construction, and focus on safety, it continues to be a trusted choice among professionals seeking reliable hydraulic solutions.
Top Page Image Contents