Final Checks
Note: The clock must be set before the ovens will work. See ‘The Clock’ section for instructions on setting the time of day.
Hotplate Check
Check each burner in turn. There is a Flame Supervision Device (FSD) that stops the ow of gas to the burner if the ame goes out. For each burner, turn the control knob to the solid ame symbol. Press in the control knob. This lets gas through to the burner. Keep holding the knob pressed in and press the igniter button or light with a match. Keep holding the control knob pressed in for about 10 seconds.
If, when you let go of the control knob the burner goes out, the safety device has not held in. Wait one minute then try again this time holding the control pressed in for slightly longer.
Grill Check
Open the grill compartment door. Turn on the grill control and check that the grill heats up.
Oven Check
Turn on the oven and check that it starts to heat up. Check that the oven lights are working.
Note: The oven light bulb is not included in the guarantee. Turn o the oven.
Final Fitting
Fitting the Handles and Handrail (Classic only)
Remove the 4 mm Allen screws from the doors
nnThe handles should be above the xings.
Remove the 4 mm Allen screws from the top corners of the fascia
Fitting the Plinth
Remove the 3 screws for the plinth mounts along the front bottom edge of the cooker
Fitting the Splashback (Classic only)
Position the splashback on the rear of the hotplate and secure with the screws supplied.
Customer Care
Installer: Please complete your details in this Guide, inform the user how to operate the cooker and hand oven the instructions.
Thank you.
Fig.7-14
Fig.7-15
Art No
Fig.7-16
25