Falcon U108610-07 Technical Data, COUNTRY OF DESTINATION Australia, Natural Gas, Propane, Input

Page 37
11. Technical Data

11. Technical Data

This cooker is designed for use on Natural Gas, although a conversion for LP (LPG X Propane (2.54 kPa)) gas is packed with the cooker.

INSTALLER: Please leave these instructions with the User.

DATA BADGE LOCATION : Cooker back, serial number repeater badge below oven door opening.

COUNTRY OF DESTINATION: Australia

Connection & Test Pressures

Gas (Rp ½ at rear right-hand side)

Electric

 

 

 

 

Natural Gas

1kPa

230V 50 Hz

 

 

 

 

Propane

2.54 kPa

 

 

 

 

 

See appliance data badge for test pressures.

 

 

 

 

 

Dimensions

 

 

 

 

 

 

Overall height

 

minimum 900 mm

 

 

maximum 925 mm

 

Overall width

 

 

900 mm

 

 

Overall depth

 

600 mm (to fascia); 650 mm (over handles)

 

Minimum space above hotplate

 

 

650 mm

 

 

Refer to ‘Positioning the Cooker’.

 

 

 

 

 

 

Ratings

 

 

 

 

 

 

Hotplate

Natural Gas 1.0 kPa

 

 

LP Gas 2.54 kPa

 

Input

Injector

Bypass

Input

Injector

Bypass

 

Wok burner

15.2 MJh-1

internal 112

90

15.0 MJh-1

internal 66

54

external 164

external 91

 

 

 

 

 

Large burner

12.3 MJh-1

165

80

12.0 MJh-1

89

41

Medium burners

6.2 MJh-1

115

56

6.2 MJh-1

67

33

Small burner

3.7 MJh-1

92

48

3.3 MJh-1

48

25

Gas burner inputs based on Gross Calori￿c Value.

Oven Efficiency

Ovens

 

Main oven

Tall oven

 

Forced air convection

Forced air convection

 

 

Maximum power output @ 230V 50 Hz

2.5 kW

2.5 kW

Energy e￿ciency class on a scale of A (more e￿cient) to G (less e￿cient)

A

A

Energy consumption based on standard load

0.90 kWh

0.99 kWh

Usable volume (litres)

 

69

66

Size

 

Large

Large

Time to cook standard load

 

38 minutes

49 minutes

Surface area of the grid

 

1400 cm2

790 cm2

Grill

2.3 kW

 

 

Maximum total electrical load at 230V (approximate total including oven lights, oven fan, etc.): 7.4 kW.

35

Image 37
Contents User Guide Installation Instructions90 Dual Fuel U108610-07Contents WARNING The appliance and its accessible parts 1. Before You Startsurfaces To avoid overheating, DO NOT install the cooker nnDO NOT use a steam cleaner to clean the cookerAlways keep combustible materials, e.g. curtains nnThis appliance is heavy so take care when moving itand ammable liquids a safe distance away from your cooker DO NOT store ammable materials in the storageHotplate Burners 2. Cooker OverviewA B C D Fig.2-1Fig.2-3 Fig.2-4 Wok BurnerFig.2-5 Fig.2-6 Fig.2-7will be unstable DO NOT put it on any other burner - it is not DO NOT put it crossways - it will not t properly anddesigned to t in any of the other pan supports Fig.2-12 Always leave space around the griddle for the gasesArtNo.210-0001 Classic grill control nnNever close the grill door when the grill is onFig.2-15 Fig.2-16A B C D E F Setting the Time of DayMinute Minder To Stop the Ovens AutomaticallyKey Lock AUTO is Showing, But you Want to Reset to Manual CookingFig.2-30Fig.2-31 Fig.2-32Oven Shelves - Right-hand Tall Oven Oven Shelves - Left-hand Main OvenThe Handyrack Main Oven Fig.2-35General Oven Tips Tips on Cooking with the TimerDO NOT use the timed oven if the adjoining oven is already warm4. Cooking Table DO NOT mix dierent cleaning products - they may 5. Cleaning Your CookerThe Single Ring Burners The Wok BurnerBefore you remove any of the grill parts for cleaning ‘Cook & Clean’ PanelsDO NOT use harsh abrasive cleaners or sharp metal Do not use steel wool, oven cleaning pads, or anyRemoving the Main Oven Linings Recommended Cleaning MethodHotplate PartHotplate ignition or hotplate burners faulty 6. TroubleshootingWhat cleaning materials are recommended for the cooker? Never use caustic or abrasive cleaners as these willFig.6-3 Fig.6-1 Fig.6-2Fig.6-4 An oven light is not workingIf you Have a Problem 7. InstallationOut of Warranty INSTALLATIONRead the instructions before installing or using this appliance Installer’s Name Installer’s Company Installer’s Telephone NumberAS 5601 - ‘Gas Installations’ Failure to install the appliance correctly couldChecking the Parts You will also need the following tools2. Side Clearances - Measurements B & C 1. Overhead - Measurement A3. Side Clearances - Measurement D & E Fig.7-1Completing the Move Lowering the Two Rear RollersOn no account try and move the cooker while it is plugged into the electricity supplyFitting the Stability Bracket and Chain Unless properly installed, the cooker could be tipped byFitting a Stability Bracket Fitting the Restraining ChainGas Connection Pressure TestingNatural Gas PropaneA N Fixed WiringFig.7-10 Fig.7-11Grill Check Hotplate CheckOven Check Fitting the Handles and Handrail Classic onlyWhen servicing or replacing gas-carrying 8. Conversion to LP GasClassic - Removing the Control Panel Toledo - Removing the Control PanelFig.8-4 1.1 To Remove the Control Panel 9. Servicing1.2 To Remove the Side Panels WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON2.2 To Replace the Hotplate Control Taps 2.1 To Remove the Hotplate2.3 To Change a Hotplate Burner Injector 2.4 To Replace a Hotplate Burner Electrode3.2 To Replace the Clock 3.1. To Replace the Ignition or Light Switch3.3 To Change the Ignition Generator 4.1 To Replace the Grill Controller5.4 To Change an Oven Element Thermal Cut-out 5.3 To Change the Oven Element5.5 To Replace an Oven Thermostat Fig.9-4 Fig.9-56.6 To Adjust the Main Oven Door Catch Keep 6.3 To Adjust the Main Oven Door Angle6.1 To Remove the Grill Door 6.2 To Replace the Main Oven Door6.8 To Replace the Tall Oven Door Outer Panel 6.7 To Remove the Tall Oven Door6.9 To Replace the Tall Oven Door Magnetic Latch 6.10 To Change an Oven Door SealDescription 10. Circuit DiagramColour Maximum power output @ 230V 50 Hz 11. Technical DataUsable volume litres COUNTRY OF DESTINATION AustraliaPage Page Tel +44 0 1926 457400 Fax +44 0 1926 Clarence Street, Royal Leamington Spa Warwickshire, CV31 2AD, EnglandE-mail consumers@falconappliances.co.uk