Falcon U108610-07 To Change the Oven Element, To Change an Oven Element Thermal Cut-out, 4 -5

Page 33
5.3To Change the Oven Element

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have ￿nished.

Fit the new fan and reassemble in reverse order. Check the operation of the oven.

5.3To Change the Oven Element

DISCONNECT FROM THE ELECTRICITY SUPPLY. Remove the oven inner back (see 5.1).

Remove the 2 screws from the top of the element and the 1 from the bottom of the element (Fig.9-5). Carefully lift the element out, disconnecting the terminals connected to the element (noting their positions).

If it is not possible to disconnect the leads in this way, pull the cooker forward to gain access to the rear, remove the screws securing the electric cover to the back sheet, remove the cover and disconnect the terminals from the rear.

Fit the new element and reassemble in reverse order. Check the operation of the oven.

5.4To Change an Oven Element Thermal Cut-out

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Pull the cooker forwards to gain access to the cover box. Undo the cover screws and lift clear. The cut-out is located on the earth plate beside the oven element connections. Disconnect the cut-out wiring. Undo the ￿xings that secure the cut-out to the earth plate and remove.

Fit the replacement control and re-assemble in reverse order.

5.5To Replace an Oven Thermostat

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the control panel and hotplate (see 1.1 & 2.1). Open the oven door and remove the oven furniture.

Main Oven

For the right-hand oven, remove the thermostat phial cover (2 screws). Unclip the thermostat phial from the clips in the oven back. For the left-hand oven, pull cooker forward to gain access to the cover box at the rear of the cooker. Remove the 4 screws securing the cover and lift clear.

Feed the thermostat capillary out of the oven. Disconnect the wiring from the thermostat. Remove

2 screws holding thermostat to mounting panel. Fit new thermostat and reassemble in reverse order. Make sure that the phial is clipped to the oven back with the phial centrally positioned between the clips.

Check the operation of the thermostat.

Tall Oven

Open the oven door. Remove oven furniture. Remove the oven inner back ￿xing screws and remove the inner back. Unclip the thermostat phial from the clips on the oven back. From the top pull the thermostat capillary up and out. Disconnect the leads and remove the thermostat and phial. Reassemble in reverse order. Check the operation of thermostat.

Element fixing screws

ArtNo.321-0005 Fan oven element

Fig.9-4

Fig.9-5

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents User Guide Installation Instructions90 Dual Fuel U108610-07Contents WARNING The appliance and its accessible parts 1. Before You Startsurfaces To avoid overheating, DO NOT install the cooker nnDO NOT use a steam cleaner to clean the cookerAlways keep combustible materials, e.g. curtains nnThis appliance is heavy so take care when moving itand ammable liquids a safe distance away from your cooker DO NOT store ammable materials in the storageHotplate Burners 2. Cooker OverviewA B C D Fig.2-1Fig.2-3 Fig.2-4 Wok BurnerFig.2-5 Fig.2-6 Fig.2-7will be unstable DO NOT put it on any other burner - it is not DO NOT put it crossways - it will not t properly anddesigned to t in any of the other pan supports Fig.2-12 Always leave space around the griddle for the gasesArtNo.210-0001 Classic grill control nnNever close the grill door when the grill is onFig.2-15 Fig.2-16A B C D E F Setting the Time of DayMinute Minder To Stop the Ovens AutomaticallyKey Lock AUTO is Showing, But you Want to Reset to Manual CookingFig.2-30Fig.2-31 Fig.2-32Oven Shelves - Right-hand Tall Oven Oven Shelves - Left-hand Main OvenThe Handyrack Main Oven Fig.2-35General Oven Tips Tips on Cooking with the TimerDO NOT use the timed oven if the adjoining oven is already warm4. Cooking Table DO NOT mix dierent cleaning products - they may 5. Cleaning Your CookerThe Single Ring Burners The Wok BurnerBefore you remove any of the grill parts for cleaning ‘Cook & Clean’ PanelsDO NOT use harsh abrasive cleaners or sharp metal Do not use steel wool, oven cleaning pads, or anyRemoving the Main Oven Linings Recommended Cleaning MethodHotplate PartHotplate ignition or hotplate burners faulty 6. TroubleshootingWhat cleaning materials are recommended for the cooker? Never use caustic or abrasive cleaners as these willFig.6-3 Fig.6-1 Fig.6-2Fig.6-4 An oven light is not workingIf you Have a Problem 7. InstallationOut of Warranty INSTALLATIONRead the instructions before installing or using this appliance Installer’s Name Installer’s Company Installer’s Telephone NumberAS 5601 - ‘Gas Installations’ Failure to install the appliance correctly couldChecking the Parts You will also need the following tools2. Side Clearances - Measurements B & C 1. Overhead - Measurement A3. Side Clearances - Measurement D & E Fig.7-1Completing the Move Lowering the Two Rear RollersOn no account try and move the cooker while it is plugged into the electricity supplyFitting the Stability Bracket and Chain Unless properly installed, the cooker could be tipped byFitting a Stability Bracket Fitting the Restraining ChainGas Connection Pressure TestingNatural Gas PropaneA N Fixed WiringFig.7-10 Fig.7-11Grill Check Hotplate CheckOven Check Fitting the Handles and Handrail Classic onlyWhen servicing or replacing gas-carrying 8. Conversion to LP GasClassic - Removing the Control Panel Toledo - Removing the Control PanelFig.8-4 1.1 To Remove the Control Panel 9. Servicing1.2 To Remove the Side Panels WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON2.2 To Replace the Hotplate Control Taps 2.1 To Remove the Hotplate2.3 To Change a Hotplate Burner Injector 2.4 To Replace a Hotplate Burner Electrode3.2 To Replace the Clock 3.1. To Replace the Ignition or Light Switch3.3 To Change the Ignition Generator 4.1 To Replace the Grill Controller5.4 To Change an Oven Element Thermal Cut-out 5.3 To Change the Oven Element5.5 To Replace an Oven Thermostat Fig.9-4 Fig.9-56.6 To Adjust the Main Oven Door Catch Keep 6.3 To Adjust the Main Oven Door Angle6.1 To Remove the Grill Door 6.2 To Replace the Main Oven Door6.8 To Replace the Tall Oven Door Outer Panel 6.7 To Remove the Tall Oven Door6.9 To Replace the Tall Oven Door Magnetic Latch 6.10 To Change an Oven Door Seal10. Circuit Diagram DescriptionColour Maximum power output @ 230V 50 Hz 11. Technical DataUsable volume litres COUNTRY OF DESTINATION AustraliaPage Page Clarence Street, Royal Leamington Spa Warwickshire, CV31 2AD, England Tel +44 0 1926 457400 Fax +44 0 1926E-mail consumers@falconappliances.co.uk
Top Page Image Contents