G e t s t a r t e d w i t h t h e W i r e l e s s H e a d s e t
The headset is also disconnected if its battery becomes discharged.
You do not need to delete the pairing with the headset to disconnect it. When you reconnect a paired headset, you are not asked for its passcode.
Connect the paired headset to your phone
To connect the headset to your phone, switch on the headset, make the connection in the Bluetooth menu of your phone, or press and hold the Call/End key.
You can set your phone to accept Bluetooth connection requests from your paired headset. In this case, the headset can automatically connect to your phone when it is switched on. In Nokia phones, this can be done by changing your paired devices settings in the Bluetooth menu.
■Troubleshooting
If you cannot connect the headset to your phone, do as follows:
•Verify that the headset is switched on and paired with your phone.
•Verify that the Bluetooth feature is activated on your phone.
•Verify that the headset is within 11 yards (10 meters) of your phone and that there are no obstructions, such as walls or other electronic devices, between the headset and the phone.
•Determine whether the pairing information list of the headset is full. The headset can store the information of up to 8 phones at a time. If the list becomes full, reset the headset to the original settings. For more information, see "Use the headset with several phones", page 13.
•If the headset does not automatically reconnect to the default or last used phone, press and hold the Call/End key for 2 seconds.
10