Singer 7442 manual DjjjjjL , +, Control Panel Functions

						1	LEDindicator
				I			Temoinadiode
	I					I	IndicadorLED
	0	0	0	0	0	0
		....
	0	0	0	0	0	0
						0-
	0	0	0	0	0	0	Patternselectionbuttons
							Touchesdeselectiondemotif
	0	0	0	0	0	0	Botonesdeselecci6ndepatr6n
	0	0	0	0	0	0
LEDindicator	_m[] ,,,,,						Stitchlengthcontrol*
%moinadiode --		O					Longueurdepoint*
IndicadorLED							ControlIongitudpuntada*
		O	1	3_ 5	7
					11 +	J	Stitchwidth/needlepositioncontrol*
							Commandede largeurde point/positiond'aiguille*
							Controldeanchodepuntada/posici6ndeaguja*

*NOTE: The provided scales and numbers on the length and width controls are for reference only and do not represent actual sewing parameters of length and width.

*REMARQUE: les _chelles et les hombres sur les commandes de Iongueur et de largeur ne sont fournis que pour r@f@rence et ne repr@sentent pas les parametres r_els de Iongueur et de largeur.

*NOTA: Las escalas y nSmeros provistos en los controles de largo y ancho son s61o para referencia y no representan los par_metros actuales de costura de largo y ancho.

CONTROL PANEL FUNCTIONS

Pattern selection buttons

Turn on the power switch and the LED indicator above the straight stitch pattern will be lit. At this point you may sew Straight Stitch.

To select other patterns, push the pattern selection button to the right of the row that contains your desired pattern. Stop when the LED indicator above your pattern is lit.

Stitch length and width/needle position controls Your sewing machine wilt produce most of your stitching requirements at an Auto/Default Stitch Length and Width. When a pattern is selected, it will automatically sew at default settings of stitch length, width and needle position for straight stitch.

C--->		--->	---->	--->
\/	_ 0	0	0	0	0
-0
/	\				} 0
:	III	I
,	III	III
	III	I

o -djjjjj_L , +

Auto (preprogrammed) default settings are easily determined by moving the Stitch Length and Width / Needle Position Control Knob. The LED Indicator next to the Control will light without

blinking and a beep wilt sound indicating you are at the Auto / Default Position.

Once you have determined the Auto / Default position you can manually change the length, width or straight stitch needle postition according to your preference. Starting at the Auto position, slide the control knob left or right to locate each of the potential adjustments. At each manual adjustment point, the LED wilt blink 3 times and a beep wilt sound.

Note: Instructions for manually changing the Straight Stitch Needle Position are contained in the "Other Information" Section.

\/

•m

I/\

O-m

4,

\/

/\

Notes: 1. Some patterns offer more opportunities for manual adjustments than others.

2. An alternate method of determining available adjustments is to move the control knobs while sewing slowly.

28