Brocade Communications Systems SBCEBFCSW manual Removing the acoustic attenuation module

Page 28

Class 1 Laser Product

Laser Klasse 1

Laser Klass 1

Luokan 1 Laserlaite

`

Appareil A Laser de Classe 1

Statement 8:

xxCAUTION:

Never remove the cover on a power supply or any part that has the following label attached.

xxCAUTION:

Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.

Complete the following steps to install a switch module:

1.Review the information in “Safety and regulatory information” on page v and “Installation guidelines” on page 12 through “Handling static-sensitive devices” on page 13.

2.Remove the acoustic attenuation module option, if necessary, from the rear of the Blade unit. See the Installation and User’s Guide for your Blade unit on the Resource CD for detailed removal instructions.

Acoustic attenuation module

Locking handle

Figure 3. Removing the acoustic attenuation module.

3.Make sure that the Blade unit is turned on, the green dc power LED on each power module is lit, and the green OK LED on the management module is lit.

4.Select only I/O bay 3 or bay 4 in which to install the switch module.

5.Remove the filler module from the I/O bay in which you are installing the switch module. Store the filler module for future use.

14	Brocade SAN Switch Module: Installation Guide

Image 28

Contents Sbcebfcsw Brocade SAN Switch Module Installation Guide Contents Brocade SAN Switch Module Installation Guide Safety and regulatory information General Safety Electrical SafetyHandling electrostatic discharge-sensitive devices Viii Use safe practices when lifting Xx Caution Regulatory specifications and disclaimers Safety complianceElectromagnetic compatibility notices USA Xiii Xiv Brocade Enterprise SAN Switch Module Sbcebfcsw for Intel Features and specifications Resource CDPage Fibre Channel switch-module standards and protocols Dimensions SFP module at 2 Gbps Mode Related documentationPage Major components of the switch module Shows the major components of the switch moduleFibre Channel switch-module major components Brocade SAN Switch Module Installation Guide Installing and replacing a switch module Installation guidelines Bay Fibre Channel switch-module functionInstalling a switch module Handling static-sensitive devicesRemoving the acoustic attenuation module Squeezing the release-lever latch Installing a switch module Removing or replacing a switch module Removing a switch module Page Brocade SAN Switch Module Installation Guide Information panel LEDs and external Fibre Channel ports Information panelLEDs Fibre Channel switch-module LEDs. Notes Port speed Green Off Configuring the switch module through the Telnet interface Connecting to the switch moduleEnter Network Password window Establishing a Telnet session through the management moduleManagement-module main window Switch Management window showing switch-module 3 example Management-module password-change window Establishing a Telnet session in a command-line window Management-module command-line interface windowTelnet command-prompt window Brocade SAN Switch Module Installation Guide Connecting to the switch module Active Session from Same Client window Management-module main window Switch Management window showing switch module 3 example Establishing a Web-interface session through a Web browser Advanced Web Tools interface window management-module viewAdvanced Web Tools interface window Web-browser view Optional features Brocade SAN Switch Module Installation Guide Getting Help and Technical Assistance Before you callBrocade SAN Switch Module Installation Guide