Brocade Communications Systems SBCEBFCSW manual

Page 51

8.To start a Web-interface session, scroll down to the Start Telnet/Web Session section and click Start Web Session.

The switch-module Advanced Web Tools interface window opens, as shown in Figure 28.

Figure 28. Advanced Web Tools interface window (management-module view).

9.To perform switch-module administrative tasks, click Admin, and log in to the switch. In the User Name field, type the initial default user name, USERID. In the Password field, type the initial default password, PASSW0RD (the sixth character is a zero, not the letter O). The user name and password are case sensitive.

For more information about using the Advanced Web Tools interface, see the Brocade

Advanced Web Tools Administrator’s Guide v4.2.0 or later on the Resource CD.

Establishing a Web-interface session through a Web browser

You can access the switch module by IP-enabled devices that are connected to the SBCE management module. An Ethernet connection to the management-module external ports on the Blade unit is required. For more information, see the following documents on the Resource CD:

•Intel Server Chassis SBCE Installation and User’s Guide

•Intel Server Chassis SBCE Management Module Installation Guide

•Intel Server Management Module SBCECMM Installation and User’s Guide

Complete the following steps to establish a Web-interface session through a Web browser:

1.Open a supported Web browser on the network-management workstation.

2.Type one of the following Web addresses in the address field and press Enter. These Web addresses contain default IP addresses.

For I/O bay 3: http://192.168.70.129

37

Image 51

Contents Sbcebfcsw Brocade SAN Switch Module Installation Guide Contents Brocade SAN Switch Module Installation Guide Safety and regulatory information Electrical Safety General SafetyHandling electrostatic discharge-sensitive devices Viii Use safe practices when lifting Xx Caution Safety compliance Regulatory specifications and disclaimersElectromagnetic compatibility notices USA Xiii Xiv Brocade Enterprise SAN Switch Module Sbcebfcsw for Intel Resource CD Features and specificationsPage Fibre Channel switch-module standards and protocols Dimensions Related documentation SFP module at 2 Gbps ModePage Shows the major components of the switch module Major components of the switch moduleFibre Channel switch-module major components Brocade SAN Switch Module Installation Guide Installing and replacing a switch module Bay Fibre Channel switch-module function Installation guidelinesHandling static-sensitive devices Installing a switch moduleRemoving the acoustic attenuation module Squeezing the release-lever latch Installing a switch module Removing or replacing a switch module Removing a switch module Page Brocade SAN Switch Module Installation Guide Information panel Information panel LEDs and external Fibre Channel portsLEDs Fibre Channel switch-module LEDs. Notes Port speed Green Off Connecting to the switch module Configuring the switch module through the Telnet interfaceEstablishing a Telnet session through the management module Enter Network Password windowManagement-module main window Switch Management window showing switch-module 3 example Management-module password-change window Management-module command-line interface window Establishing a Telnet session in a command-line windowTelnet command-prompt window Brocade SAN Switch Module Installation Guide Connecting to the switch module Active Session from Same Client window Management-module main window Switch Management window showing switch module 3 example Advanced Web Tools interface window management-module view Establishing a Web-interface session through a Web browserAdvanced Web Tools interface window Web-browser view Optional features Brocade SAN Switch Module Installation Guide Before you call Getting Help and Technical AssistanceBrocade SAN Switch Module Installation Guide