Brocade Communications Systems SBCEBFCSW manual Fibre Channel switch-module LEDs. Notes

Page 37

OK !

OK LED (green)
	Fault (system error)
	LED (amber)
Port speed LED	Port diagnostics LED

2G RXTX !

0

Port status LED

Figure 9. Fibre Channel switch-module LEDs. Notes:

•The illustrations in this document might differ slightly from your hardware.

•An amber LED is lit when a system error or event has occurred. To identify the error or event, check the LEDs on the information panel of the switch module and see Table 2 for more information.

•An LED test occurs whenever the switch module is turned on. All LEDs are lit and remain lit for approximately 5 seconds; then, the LEDs will all turn off, except the OK LED. The OK LED flashes to indicate a normal POST condition; then, POST proceeds as described in step 12 on page 16.

•See the diagnostic section of the Brocade Diagnostic and System Error Message Reference Manual on the Resource CD for more information about the LEDs.

Table 2. Switch-module LED descriptions .

LED name	LED color and state	Hardware status

System status (OK	None	The switch module is off or receiving no power.
and !)

System status (OK)	Green: Steady	The switch module is on and the power modules in
		the SBCE unit are correctly operating.

	Green: Flashing	POST is running.

	Green: Off	The amber LED is lit or there is no power.

System status (!)	Amber: Steady	Fault. POST failure or critical alert.
(Fibre Channel		When this LED is lit, the system-error LED on the
switch-module fault)		When this LED is lit, the system-error LED on the
		SBCE unit is also lit.

	Amber: Off	The green LED is lit, indicating a healthy switch, or, if
		the green LED is off, there is no power.

23

Image 37

Contents Sbcebfcsw Brocade SAN Switch Module Installation Guide Contents Brocade SAN Switch Module Installation Guide Safety and regulatory information Electrical Safety General SafetyHandling electrostatic discharge-sensitive devices Viii Use safe practices when lifting Xx Caution Safety compliance Regulatory specifications and disclaimersElectromagnetic compatibility notices USA Xiii Xiv Brocade Enterprise SAN Switch Module Sbcebfcsw for Intel Resource CD Features and specificationsPage Fibre Channel switch-module standards and protocols Dimensions Related documentation SFP module at 2 Gbps ModePage Shows the major components of the switch module Major components of the switch moduleFibre Channel switch-module major components Brocade SAN Switch Module Installation Guide Installing and replacing a switch module Bay Fibre Channel switch-module function Installation guidelinesHandling static-sensitive devices Installing a switch moduleRemoving the acoustic attenuation module Squeezing the release-lever latch Installing a switch module Removing or replacing a switch module Removing a switch module Page Brocade SAN Switch Module Installation Guide Information panel Information panel LEDs and external Fibre Channel portsLEDs Fibre Channel switch-module LEDs. Notes Port speed Green Off Connecting to the switch module Configuring the switch module through the Telnet interfaceEstablishing a Telnet session through the management module Enter Network Password windowManagement-module main window Switch Management window showing switch-module 3 example Management-module password-change window Management-module command-line interface window Establishing a Telnet session in a command-line windowTelnet command-prompt window Brocade SAN Switch Module Installation Guide Connecting to the switch module Active Session from Same Client window Management-module main window Switch Management window showing switch module 3 example Advanced Web Tools interface window management-module view Establishing a Web-interface session through a Web browserAdvanced Web Tools interface window Web-browser view Optional features Brocade SAN Switch Module Installation Guide Before you call Getting Help and Technical AssistanceBrocade SAN Switch Module Installation Guide