Brocade Communications Systems SBCEBFCSW Establishing a Telnet session in a command-line window

Page 44

After you have changed all of the passwords, the command prompt is displayed in a window similar to the one in Figure 18 on page 30.

Figure 18. Management-module command-line interface window.

11. To open online help to view the available commands, type help and press Enter.

For more information about using the CLI, see the Brocade Fabric OS Reference Manual on the Resource CD.

Establishing a Telnet session in a command-line window

You can access the switch module by IP-enabled devices that are connected to the SBCE management module. An Ethernet connection to the management-module external ports on the Blade unit is required. For more information, see the following documents on the Resource CD:

•Intel Server Chassis SBCE Installation and User’s Guide

•Intel Server Chassis SBCE Management Module Installation Guide

•Intel Server Management Module SBCECMM Installation and User’s Guide

Complete the following steps to establish a Telnet session through a command-line window:

1.Open a command-line window on the network-management workstation.

2.Type one of the following commands and press Enter. The IP addresses in these commands are default IP addresses.

For the switch module in I/O bay 3: telnet 192.168.70.129

For the switch module in I/O bay 4: telnet 192.168.70.130

30

Brocade SAN Switch Module: Installation Guide

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Sbcebfcsw Brocade SAN Switch Module Installation Guide Contents Brocade SAN Switch Module Installation Guide Safety and regulatory information General Safety Electrical SafetyHandling electrostatic discharge-sensitive devices Viii Use safe practices when lifting Xx Caution Regulatory specifications and disclaimers Safety complianceElectromagnetic compatibility notices USA Xiii Xiv Brocade Enterprise SAN Switch Module Sbcebfcsw for Intel Features and specifications Resource CDPage Fibre Channel switch-module standards and protocols Dimensions SFP module at 2 Gbps Mode Related documentationPage Major components of the switch module Shows the major components of the switch moduleFibre Channel switch-module major components Brocade SAN Switch Module Installation Guide Installing and replacing a switch module Installation guidelines Bay Fibre Channel switch-module functionInstalling a switch module Handling static-sensitive devicesRemoving the acoustic attenuation module Squeezing the release-lever latch Installing a switch module Removing or replacing a switch module Removing a switch module Page Brocade SAN Switch Module Installation Guide Information panel LEDs and external Fibre Channel ports Information panelLEDs Fibre Channel switch-module LEDs. Notes Port speed Green Off Configuring the switch module through the Telnet interface Connecting to the switch moduleEnter Network Password window Establishing a Telnet session through the management moduleManagement-module main window Switch Management window showing switch-module 3 example Management-module password-change window Establishing a Telnet session in a command-line window Management-module command-line interface windowTelnet command-prompt window Brocade SAN Switch Module Installation Guide Connecting to the switch module Active Session from Same Client window Management-module main window Switch Management window showing switch module 3 example Establishing a Web-interface session through a Web browser Advanced Web Tools interface window management-module viewAdvanced Web Tools interface window Web-browser view Optional features Brocade SAN Switch Module Installation Guide Getting Help and Technical Assistance Before you callBrocade SAN Switch Module Installation Guide
Top Page Image Contents