Brocade Communications Systems SBCEBFCSW manual Removing or replacing a switch module

Page 31

module installation instructions, see the documentation that comes with the SFP module.

✏NOTE

SFP module options do not come with the switch module, but are required if you want to use external switch-module ports.

15.Use LC-LC or LC-SC fiber-optic cables to connect the switch-module external ports to external Fibre Channel devices. For more information, see the documentation that comes with the cable options.

✏NOTE

You can remove and replace an SFP module while the switch module is operating without damaging the switch module or the SFP module. However, transmission on the affected port will be interrupted until the SFP module and cables are installed. See the documentation that comes with the connected Fibre Channel device for information about installation, configuration, and startup sequence.

16.Replace the acoustic attenuation module, if you removed it in step 2 on page 14.

17.Continue with Chapter 3, “Information panel LEDs and external Fibre Channel ports,” on page 21.

Removing or replacing a switch module

Statement 8:

xxCAUTION:

Never remove the cover on a power supply or any part that has the following label attached.

xxCAUTION:

Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you

a problem with one of these parts, contact a service technician.

Complete the following steps to replace a switch module:

1.Review the information in “Safety and regulatory information” on page v and “Installation guidelines” on page 12 through “Handling static-sensitive devices” on page 13.

2.Remove the acoustic attenuation module, if any, from the rear of the SBCE unit. For more information, see the illustration in step 2 on page 14 and the Intel Server Chassis SBCE Installation and User’s Guide on the Resource CD that came with your SBCE unit.

3.Remove the LC-LC or LC-SC fiber-optic cables from the two external ports on the SFP module. Removing these cables disrupts the network connection from the external Fibre Channel port to any connected external Fibre Channel devices. For removal instructions, see the documentation that comes with the cable options.

17

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Sbcebfcsw Brocade SAN Switch Module Installation Guide Contents Brocade SAN Switch Module Installation Guide Safety and regulatory information Electrical Safety General SafetyHandling electrostatic discharge-sensitive devices Viii Use safe practices when lifting Xx Caution Safety compliance Regulatory specifications and disclaimersElectromagnetic compatibility notices USA Xiii Xiv Brocade Enterprise SAN Switch Module Sbcebfcsw for Intel Resource CD Features and specificationsPage Fibre Channel switch-module standards and protocols Dimensions Related documentation SFP module at 2 Gbps ModePage Shows the major components of the switch module Major components of the switch moduleFibre Channel switch-module major components Brocade SAN Switch Module Installation Guide Installing and replacing a switch module Bay Fibre Channel switch-module function Installation guidelinesHandling static-sensitive devices Installing a switch moduleRemoving the acoustic attenuation module Squeezing the release-lever latch Installing a switch module Removing or replacing a switch module Removing a switch module Page Brocade SAN Switch Module Installation Guide Information panel Information panel LEDs and external Fibre Channel portsLEDs Fibre Channel switch-module LEDs. Notes Port speed Green Off Connecting to the switch module Configuring the switch module through the Telnet interfaceEstablishing a Telnet session through the management module Enter Network Password windowManagement-module main window Switch Management window showing switch-module 3 example Management-module password-change window Management-module command-line interface window Establishing a Telnet session in a command-line windowTelnet command-prompt window Brocade SAN Switch Module Installation Guide Connecting to the switch module Active Session from Same Client window Management-module main window Switch Management window showing switch module 3 example Advanced Web Tools interface window management-module view Establishing a Web-interface session through a Web browserAdvanced Web Tools interface window Web-browser view Optional features Brocade SAN Switch Module Installation Guide Before you call Getting Help and Technical AssistanceBrocade SAN Switch Module Installation Guide
Top Page Image Contents