Brocade Communications Systems SBCEBFCSW manual Port speed Green Off

Page 38

Table 2. Switch-module LED descriptions (continued).

LED name	LED color and state	Hardware status

Port speed	Green: Off	The indicated Fibre Channel switch-module port (0 or
		15) is operating at 1 Gbps.

	Green: On	The indicated Fibre Channel switch-module port (0 or
		15) is operating at 2 Gbps.

Port status	Green: Off	No signal or the port diagnostics LED is active on the
		indicated port (0 or 15).

	Green: Steady	The indicated port (0 or 15) is online.

	Green: Flickering	The indicated port (0 or 15) is connected and Fibre
		Channel activity is occurring on that port.

	Green: Flashing slowly	The indicated port (0 or 15) is online but segmented
		from the connected switch or device.

	Green: Flashing rapidly	The indicated port (0 or 15) is in the internal loopback
		mode because of diagnostics.

Port diagnostics	Amber: Off	No faults on the indicated port (0 or 15).

	Amber: Steady	The indicated port (0 or 15) signal is present but not
		online.

	Amber: Flashing slowly	The indicated port (0 or 15) has been disabled, or
		switch beaconing is on.

	Amber: Flashing rapidly	This LED is lit on the indicated port (0 or 15) when the
		port-diagnostics program has discovered an error
		(port fault).

✏ NOTE

For LED locations, see Figure 9 on page 23.

24	Brocade SAN Switch Module: Installation Guide

Image 38

Contents Sbcebfcsw Brocade SAN Switch Module Installation Guide Contents Brocade SAN Switch Module Installation Guide Safety and regulatory information General Safety Electrical SafetyHandling electrostatic discharge-sensitive devices Viii Use safe practices when lifting Xx Caution Regulatory specifications and disclaimers Safety complianceElectromagnetic compatibility notices USA Xiii Xiv Brocade Enterprise SAN Switch Module Sbcebfcsw for Intel Features and specifications Resource CDPage Fibre Channel switch-module standards and protocols Dimensions SFP module at 2 Gbps Mode Related documentationPage Major components of the switch module Shows the major components of the switch moduleFibre Channel switch-module major components Brocade SAN Switch Module Installation Guide Installing and replacing a switch module Installation guidelines Bay Fibre Channel switch-module functionInstalling a switch module Handling static-sensitive devicesRemoving the acoustic attenuation module Squeezing the release-lever latch Installing a switch module Removing or replacing a switch module Removing a switch module Page Brocade SAN Switch Module Installation Guide Information panel LEDs and external Fibre Channel ports Information panelLEDs Fibre Channel switch-module LEDs. Notes Port speed Green Off Configuring the switch module through the Telnet interface Connecting to the switch moduleEnter Network Password window Establishing a Telnet session through the management moduleManagement-module main window Switch Management window showing switch-module 3 example Management-module password-change window Establishing a Telnet session in a command-line window Management-module command-line interface windowTelnet command-prompt window Brocade SAN Switch Module Installation Guide Connecting to the switch module Active Session from Same Client window Management-module main window Switch Management window showing switch module 3 example Establishing a Web-interface session through a Web browser Advanced Web Tools interface window management-module viewAdvanced Web Tools interface window Web-browser view Optional features Brocade SAN Switch Module Installation Guide Getting Help and Technical Assistance Before you callBrocade SAN Switch Module Installation Guide