Bradford-White Corp TGHE-160I-N(X), TGHE-1991-N(X) Mounting the Vent System Vertical Discharge

Mounting the Vent System – Vertical Discharge

Figure 32. Illustration Showing the Installation of Vertical Discharge Venting.

Vent connections must be firmly pressed together, so that the gaskets form an airtight seal. Secure the system with a vent pipe clamp or perforated hanger iron.

High Altitude Installations

The default setting for the water is 0-2,000 ft (0-610 m) with dip switch numbers 2 and 3 in the OFF position. If this water heater is installed at a higher altitude, it is necessary to modify the dip switch settings according to Table 9.

Table 9. Dip Switch Settings for High Altitude Installations.

			0-2000 ft				2001-5200 ft
	(0-610 m)					(610-1585 m)
Switch No. 2				OFF					OFF
Switch No. 3				OFF					ON
		Switch No.					Switch No.
				ON						ON
			O					O
					1						1
			F					F
			F		2			F			2
					3						3
					4							4
					5						5
					6						6
					7						7
					8						8

5201-7700 ft

(1585-2347 m)

ON

OFF

Switch No.

	ON
O
		1
F
F		2
		3
			4
		5
		6
		7
		8

7701-10200 ft

(2347-3109 m)

ON

ON

Switch No.

	ON
O
	1
F
F		2

3 4 5 6 7 8

40