Harman-Kardon AVR 145 owner manual Remote Control Functions

Page 13

REMOTE CONTROL FUNCTIONS

Speaker Setup: Press this button to configure speaker sizes, that is, the frequency-range capability of each speaker. Usually this is done using the on-screen menu system, as described in the Getting Started section.

Navigation and Set Buttons: These buttons are used together to make selections within the on-screen menu system, or when accessing the functions of the four buttons surrounding this area of the remote – Channel Level, Speaker Setup, Digital Input or Delay.

Digital Input Select: Press this button to select the specific digital audio input (or analog audio input) you used for the current source.

Delay: Press this button to set delay times that compensate for placing the speakers at different distances from the listening position, or to resolve a “lip sync” issue that may be caused by digital video process- ing. This is done using the on-screen menu system, as described in the Initial Setup section.

Numeric Keys: Use these buttons to enter radio station frequencies when using the tuner (after pressing the Direct Button), or to select station presets.

Tuning Mode: This button toggles between manual (one frequency step at a time) and automatic (seeks frequencies with acceptable signal strength) tuning mode. It also toggles between stereo and mono modes when an FM station is tuned.

Memory: After you have tuned a particular radio station, press this button, then the numeric keys, to save that station as a radio preset.

Tuning: Press these buttons to tune a radio station. Depending on whether the tuning mode has been set to manual or automatic, each press will either change one frequency step at a time, or seek the next frequency with acceptable signal strength.

Direct: Press this button before using the Numeric Keys to directly enter a radio station frequency.

Clear: Press this button to clear a radio station frequency you have started to enter.

Preset Stations Selector: Press these buttons to select a preset radio station.

Tone Mode: Press this button to access the tone controls (bass and treble). Use the Navigation buttons to make your selections.

Disc Skip: This button has no effect on the receiver, but is used with some optical disc changers to skip to the next disc.

Macros: These buttons may be programmed to execute long com- mand sequences with a single button press. They are useful for pro- gramming the command to turn on or off all of your components, or for accessing specialized functions for a different component than you are currently operating.

Surround Mode Selectors: Press any of these buttons to select a type of surround sound (e.g., multichannel) mode. Choose from the Dolby modes, DTS modes, Logic 7 modes or Stereo modes. Each press of a button will cycle to the next available variant of that mode. Not all modes or mode groups are available with all sources.

Night Mode: Press this button to activate Night mode with specially encoded Dolby Digital discs or broadcasts. Night mode compresses the audio so that louder passages are reduced in volume to avoid disturbing others, while dialogue remains intelligible.

Track Skip: These buttons have no effect on the receiver, but are used with many source components to change tracks or chapters.

Dim: Press this button to partially or fully dim the front-panel display.

Transport Controls: These buttons have no effect on the receiver, but are used to control many source components. By default, when the remote is operating the receiver, these buttons will control a DVD player.

13

Image 13
Contents AVR Table of Contents When replacement parts are required, be Safety InformationTime Important Safety Information Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Switch Select Surround Tuning Preset Stations Headphone DigitalMessage Display Source Video InputsREAR-PANEL Connections Video Coaxial Digital RS-232 Inputs Inputs 1 DMP Input Reset ModeMonitor Bridge RS-232 AM AntennaVideo 3 Controls televisions and other video displays Remote Control FunctionsBridge/DMP Controls an iPod docked in The Bridge AM/FM Remote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRTypes of Cables Speaker CablesDigital Audio Audio ConnectionsVideo Connections Analog AudioAntennas FM antenna uses a 75-ohm F-connectorRS-232 Serial Port SUB Speaker PlacementStep One Connect the Speakers InstallationStep Three Connect the Antennas Step Four Connect the Source ComponentsVideo 1 Source Video 2 Source Installation StepsVideo 3 Source TapeStep Five Connect Video Display Step Six Plug in AC PowerStep Seven Insert Batteries in Remote Enter a code from above Turn on your source deviceTape Cassette Two steps are required the first time you turn on the AVR Step Nine Turn On the AVRUsing the On-Screen Menu System Initial SetupStep One Determine Speaker Size Step Two Measure Speaker Distances Step Three Manual Setup MenuSpeaker Size Menu Press the Set Button to display the Speaker Size submenuSpeaker Crossover Menu Speaker/Channel Input IndicatorsStep Four EzSet Output Level Calibration Delay Adjust MenuThis is the last step in the configuration process Step Five Configure SourcesAdvanced users may rerun EzSet for each mode individually You are now ready to begin enjoying your new receiver Volume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionAudio Input Selection Using the TunerVideo Input Selection Channel Direct InputsUse the Numeric Keys to enter the desired preset number Using TheBridgeTMRecording Radio stations may be selected in one of four waysAdvanced Functions Selecting a Surround ModeDigital Audio Signals Analog Audio SignalsAudio Processing and Surround Sound Surround Select Menu Screen Night Mode Dolby Surround SettingsDefault Modes UpsamplingSee below Surround Mode Description Incoming Bitstream or SignalVariants are available Dolby Digital 2.0 orSee below DTS Neo6Presentation DTS Neo6 96kHz processing LogicUsing the Remote Control With the Test Tone Setting Channel Output Levels ManuallyUsing the Front-Panel Controls Using the Full-OSD MenuSystem Settings Dim Function Advanced Remote Control FunctionsPunch-Through Programming MacrosProcessor Reset Resetting the RemoteMemory Press the Surround Button to erase the macroTroubleshooting Guide DTS AVR 145 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsVideo Bridge/DMP Tape Tuner Channel Title Video InputTable A7 System Settings Table A6 Remote Control CodesVideo Cable, Satellite Remote Control Function List Reference DVD CD/CD-R FAV Aiwa Logik Teknika Aiwa Realistic Adcom RCX Alphastar ABC Rembrant

AVR 145 specifications

The Harman-Kardon AVR 145 is a compact yet powerful audio/video receiver designed to deliver an exceptional home theater experience. Launched to meet the needs of both music enthusiasts and movie lovers, the AVR 145 combines advanced technology with user-friendly features, making it a popular choice for those seeking quality sound and versatility.

One of the standout features of the AVR 145 is its impressive power output. The receiver delivers up to 50 watts per channel at 8 ohms, allowing it to produce rich and immersive audio across various media formats. This output ensures that even the most bass-heavy soundtracks and delicate dialogue are rendered with clarity and precision, enhancing the overall listening experience.

Harman-Kardon is known for its commitment to quality sound, and the AVR 145 is no exception. It supports multiple audio formats, including Dolby Digital and DTS, which provide surround sound capabilities that make movies feel like a cinematic experience at home. The receiver also includes High Definition Multimedia Interface (HDMI) inputs, supporting high-resolution video signals while simplifying connectivity between devices.

In terms of connectivity, the AVR 145 is equipped with several inputs and outputs, allowing users to connect multiple audio and video sources. It features composite video, component video, and multiple optical and coaxial digital audio inputs, making it compatible with various devices such as DVD players, game consoles, and media streaming devices. This versatility ensures that users can easily integrate the AVR 145 into their existing entertainment systems.

The user interface of the AVR 145 is thoughtfully designed, making it easy for users to navigate through settings and inputs. The built-in on-screen display offers a straightforward setup experience, and the remote control is intuitive for effortless operation. Additionally, the receiver includes a stereo mode for those who prefer a two-channel audio experience, catering to both modern surround sound setups and traditional stereo configurations.

Another notable characteristic of the AVR 145 is its compact design. With a sleek and elegant appearance, it fits seamlessly into any home entertainment setup without taking up excessive space. This aesthetic appeal, combined with its robust performance, positions the AVR 145 as a brilliant choice for anyone looking to enhance their audio experience without the bulk.

In summary, the Harman-Kardon AVR 145 stands out as a remarkable A/V receiver that combines powerful performance, versatile connectivity, and user-friendly design. Whether for movies, music, or gaming, it is an excellent addition to any home theater system, providing a reliable and high-quality audio experience for years to come.