Harman-Kardon AVR 145 owner manual Video 1 Source

Page 20

INSTALLATION

NOTE: It’s possible for a source to use none of the connections named for that source. For example, you might connect your DVD player to the Component Video 1 inputs and the Coax 1 digital audio input. However, we will refer to this source as “DVD”, and in Step Five of the Initial Setup section you will pro- gram the receiver so that these connections are assigned to the DVD source. When you select “DVD” as your source using the front panel or the remote, the correct connections for your DVD player will be used.

We recommend connecting your various sources using the connections shown in Table 2 below in order to simplify programming your receiver and remote control. However, you may connect any device to any source input.

 

Device Type

AVR 145 Source Input

Audio Connections

Video Connections

 

 

 

 

 

 

 

 

VCR, DVR, PVR,

Video 1

• Video 1 Analog (inputs and outputs)

• One of component Video 2, Video 1 S-video

 

 

TiVo or other

 

and

or Video 1 composite video

 

 

audio/video recorder

 

• Either Coax 2 or Optical 2, with

• For recording, use Video 1 S-video or

 

 

 

 

corresponding coax or optical digital

composite video output, and do not use

 

 

 

 

output

component video connections at all

 

 

 

 

 

 

 

 

Cable TV, Satellite,

Video 2

• Video 2 Analog and

• One of component Video 2, Video 2

 

 

HDTV or other

 

• Optical 1

S-video, Video 2 composite video

 

 

device that delivers

 

 

 

 

 

television programs

 

 

 

 

 

 

 

 

 

 

 

TV, game console,

Video 3 (front-panel jacks)

• Video 3 Analog and

• One of component Video 2, Video 3 S-video

 

 

camera or other

 

• Either Coax 3 or Optical 3

or Video 3 composite video

 

 

audio/video device

 

 

 

 

 

 

 

 

 

 

 

DVD Audio/Video,

DVD

• DVD Analog

• Component Video 1

 

 

SACD HD-DVD,

 

• 6-Channel inputs (optional) and

 

 

 

Blu-ray Disc

 

• Coax 1

 

 

 

 

 

 

 

 

 

CD player

CD

• CD Analog and

• Not required

 

 

 

 

• Either Coax 2 or Optical 2

 

 

 

 

 

 

 

 

 

CDR, MiniDisc,

Tape

• Tape Analog (inputs and outputs) and

• Not required

 

 

cassette

 

• Either Coax 2 or Optical 2

 

 

 

 

 

• Use corresponding coax or

 

 

 

 

 

optical digital output

 

 

 

 

 

 

 

Table 2 – Recommended Source Component Connections

 

 

 

Video 1 Source

Since this source includes audio and video recording output jacks, it is best suited to a video recorder, such as your VCR or DVR.

Referring to Table 2, connect your recorder to the Video 1 Analog Audio inputs and outputs and to either the Coax 2 or Optical 2 digital audio input (and corresponding digital audio output). Use either the Video 1 S-video or composite video input and output if you wish to make recordings. If you don’t plan on recording, you may use the Component Video 2 inputs.

Figure 18 – Video 1 A/V Inputs and Outputs, and Digital Audio Inputs

Remember to connect the audio and video output jacks on your recorder to the Video 1 or digital audio input jacks on the AVR, and the audio and video input jacks on your recorder to the Video 1 or digital audio output jacks on the AVR.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents AVR Table of Contents Time Safety InformationWhen replacement parts are required, be Important Safety Information Introduction Thank you for choosing Harman KardonAudio Section Surround ModesSupplied Accessories Audio InputsAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Surround Tuning Preset Stations Headphone Digital Switch SelectMessage Display Source Video InputsREAR-PANEL Connections Inputs Inputs 1 DMP Input Reset Mode Video Coaxial Digital RS-232Monitor Bridge RS-232 AM AntennaBridge/DMP Controls an iPod docked in The Bridge Remote Control FunctionsVideo 3 Controls televisions and other video displays AM/FM Remote Control Functions Introduction to Home Theater Surround ModesTypical Home Theater System Multichannel AudioConnecting Source Devices to the AVR ConnectionsTypes of Cables Speaker CablesAudio Connections Digital AudioVideo Connections Analog AudioRS-232 Serial Port FM antenna uses a 75-ohm F-connectorAntennas Speaker Placement SUBInstallation Step One Connect the SpeakersStep Three Connect the Antennas Step Four Connect the Source ComponentsVideo 1 Source Installation Steps Video 2 SourceVideo 3 Source TapeStep Seven Insert Batteries in Remote Step Six Plug in AC PowerStep Five Connect Video Display Tape Cassette Turn on your source deviceEnter a code from above Step Nine Turn On the AVR Two steps are required the first time you turn on the AVRStep One Determine Speaker Size Initial SetupUsing the On-Screen Menu System Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Press the Set Button to display the Speaker Size submenuSpeaker/Channel Input Indicators Speaker Crossover MenuDelay Adjust Menu Step Four EzSet Output Level CalibrationAdvanced users may rerun EzSet for each mode individually Step Five Configure SourcesThis is the last step in the configuration process You are now ready to begin enjoying your new receiver Sleep Timer Volume ControlOperation Turning On the AVRHeadphones Mute FunctionTone Controls Source SelectionUsing the Tuner Audio Input SelectionVideo Input Selection Channel Direct InputsUsing TheBridgeTM Use the Numeric Keys to enter the desired preset numberRecording Radio stations may be selected in one of four waysSelecting a Surround Mode Advanced FunctionsAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Surround Select Menu Screen Dolby Surround Settings Night ModeDefault Modes UpsamplingSurround Mode Description Incoming Bitstream or Signal See belowVariants are available Dolby Digital 2.0 orDTS Neo6 See belowPresentation DTS Neo6 96kHz processing LogicSetting Channel Output Levels Manually Using the Remote Control With the Test ToneUsing the Front-Panel Controls Using the Full-OSD MenuSystem Settings Advanced Remote Control Functions Dim FunctionPunch-Through Programming MacrosResetting the Remote Processor ResetMemory Press the Surround Button to erase the macroTroubleshooting Guide AVR 145 Technical Specifications DTSAppendix default settings, worksheets, remote product codes Table A1 Source Input Setting DefaultsTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A4 Source Input Settings Table A5 Speaker/Channel SettingsVideo Bridge/DMP Tape Tuner Channel Title Video InputVideo Cable, Satellite Table A6 Remote Control CodesTable A7 System Settings Remote Control Function List Reference DVD CD/CD-R FAV Aiwa Logik Teknika Aiwa Realistic Adcom RCX Alphastar ABC Rembrant

AVR 145 specifications

The Harman-Kardon AVR 145 is a compact yet powerful audio/video receiver designed to deliver an exceptional home theater experience. Launched to meet the needs of both music enthusiasts and movie lovers, the AVR 145 combines advanced technology with user-friendly features, making it a popular choice for those seeking quality sound and versatility.

One of the standout features of the AVR 145 is its impressive power output. The receiver delivers up to 50 watts per channel at 8 ohms, allowing it to produce rich and immersive audio across various media formats. This output ensures that even the most bass-heavy soundtracks and delicate dialogue are rendered with clarity and precision, enhancing the overall listening experience.

Harman-Kardon is known for its commitment to quality sound, and the AVR 145 is no exception. It supports multiple audio formats, including Dolby Digital and DTS, which provide surround sound capabilities that make movies feel like a cinematic experience at home. The receiver also includes High Definition Multimedia Interface (HDMI) inputs, supporting high-resolution video signals while simplifying connectivity between devices.

In terms of connectivity, the AVR 145 is equipped with several inputs and outputs, allowing users to connect multiple audio and video sources. It features composite video, component video, and multiple optical and coaxial digital audio inputs, making it compatible with various devices such as DVD players, game consoles, and media streaming devices. This versatility ensures that users can easily integrate the AVR 145 into their existing entertainment systems.

The user interface of the AVR 145 is thoughtfully designed, making it easy for users to navigate through settings and inputs. The built-in on-screen display offers a straightforward setup experience, and the remote control is intuitive for effortless operation. Additionally, the receiver includes a stereo mode for those who prefer a two-channel audio experience, catering to both modern surround sound setups and traditional stereo configurations.

Another notable characteristic of the AVR 145 is its compact design. With a sleek and elegant appearance, it fits seamlessly into any home entertainment setup without taking up excessive space. This aesthetic appeal, combined with its robust performance, positions the AVR 145 as a brilliant choice for anyone looking to enhance their audio experience without the bulk.

In summary, the Harman-Kardon AVR 145 stands out as a remarkable A/V receiver that combines powerful performance, versatile connectivity, and user-friendly design. Whether for movies, music, or gaming, it is an excellent addition to any home theater system, providing a reliable and high-quality audio experience for years to come.
Top Page Image Contents