Harman-Kardon AVR 145 owner manual REAR-PANEL Connections

Page 9

REAR-PANEL CONNECTIONS

AM and FM Antenna Terminals: Connect the included AM and FM antennas to their respective terminals for radio reception.

Front, Center and Surround Speaker Outputs: Use two-con- ductor speaker wire to connect each set of terminals to the correct speaker. Remember to observe the correct polarity (positive and nega- tive connections). Always connect the positive lead to the colored termi- nal on the receiver and the red terminal on the speaker. Connect the negative lead to the black terminal on both the receiver and the speaker. See the Connections section for more information on connecting your speakers.

Subwoofer Output: If you have a powered subwoofer, connect it to this jack.

Video 1, Video 2 and DVD Audio/Video Inputs: These jacks may be used to connect your video-capable source components (e.g., VCR, DVD player, cable TV box) to the receiver. Remember to use only one type of video connection for each source. See the Connections section for more information on audio and video connection options for each source component.

Video 1 Audio/Video Outputs: These jacks may be used to con- nect your VCR or another recorder.

Composite and S-Video Monitor Outputs: If some of your sources use composite or S-video connections, then you will need to connect one or both of these monitor outputs to the corresponding inputs on your television or video display in order to view the sources.

CD and Tape Audio Inputs: These jacks may be used to connect your audio-only source components (e.g., CD player, tape deck). Do not connect a turntable to these jacks unless you are using the turntable with a phono preamp.

Tape Outputs: These jacks may be used to connect your CDR or another audio-only recorder.

Coaxial and Optical Digital Audio Inputs: If your source has a compatible digital audio output, connect it to one of these jacks for improved audio performance. Remember to use only one type of digital audio connection for each source.

Coaxial and Optical Digital Audio Outputs: If your source is also an audio recorder, you may connect a compatible digital audio out- put to the recorder’s input for improved recording quality.

The Bridge/DMP Input: Connect the optional Harman Kardon TheBridgeTM to this input for use with your iPod (not included). Make sure the receiver is turned off (in Standby mode) when connecting The Bridge.

6-Channel Inputs: Connect the analog audio outputs of a DVD- Audio, SACD™, Blu-ray Disc™ or HD-DVD™player (or any other external decoder) to these jacks to enjoy these proprietary formats.

Component Video Inputs: If both your video source (e.g., DVD player or HDTV tuner) and your television or video display have analog component video (Y/Pb/Pr) capability, then you may connect the com- ponent video outputs of your source to one of the two component video inputs. Do not make any other video connections to that source.

Component Video Monitor Outputs: If you are using one or both of the Component Video Inputs and your television or video display is component-video-capable, you may connect these jacks to the corre- sponding inputs on your video display. You will also need to connect the composite and/or S-video monitor outputs to your video display if some of your sources use those types of video connections.

RS-232 Serial Port: This specialized connector may be used with your personal computer in case Harman Kardon offers a software upgrade for the receiver at some time in the future.

RS-232 Mode: Leave this switch popped out in the Operate position unless the AVR 145 is being upgraded.

RS-232 Reset: This switch is only used during a software upgrade. A standard processor reset is performed by pressing and holding the front-panel Tone button.

Switched AC Accessory Outlet: You may plug the AC power cord of one source device into this outlet, and it will turn on whenever you turn on the receiver. Do not use a source that consumes more than 50 watts of power.

AC Power Cord: After you have made all other connections, plug the AC power cord into an unswitched outlet.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AVR Table of Contents Safety Information When replacement parts are required, beTime Important Safety Information Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Switch Select Surround Tuning Preset Stations Headphone DigitalMessage Display Source Video InputsREAR-PANEL Connections Video Coaxial Digital RS-232 Inputs Inputs 1 DMP Input Reset ModeMonitor Bridge RS-232 AM AntennaRemote Control Functions Video 3 Controls televisions and other video displaysBridge/DMP Controls an iPod docked in The Bridge AM/FM Remote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRTypes of Cables Speaker CablesDigital Audio Audio ConnectionsVideo Connections Analog AudioFM antenna uses a 75-ohm F-connector AntennasRS-232 Serial Port SUB Speaker PlacementStep One Connect the Speakers InstallationStep Three Connect the Antennas Step Four Connect the Source ComponentsVideo 1 Source Video 2 Source Installation StepsVideo 3 Source TapeStep Six Plug in AC Power Step Five Connect Video DisplayStep Seven Insert Batteries in Remote Turn on your source device Enter a code from aboveTape Cassette Two steps are required the first time you turn on the AVR Step Nine Turn On the AVRInitial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Two Measure Speaker Distances Step Three Manual Setup MenuSpeaker Size Menu Press the Set Button to display the Speaker Size submenuSpeaker Crossover Menu Speaker/Channel Input IndicatorsStep Four EzSet Output Level Calibration Delay Adjust MenuStep Five Configure Sources This is the last step in the configuration processAdvanced users may rerun EzSet for each mode individually You are now ready to begin enjoying your new receiver Volume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionAudio Input Selection Using the TunerVideo Input Selection Channel Direct InputsUse the Numeric Keys to enter the desired preset number Using TheBridgeTMRecording Radio stations may be selected in one of four waysAdvanced Functions Selecting a Surround ModeAnalog Audio Signals Digital Audio SignalsAudio Processing and Surround Sound Surround Select Menu Screen Night Mode Dolby Surround SettingsDefault Modes UpsamplingSee below Surround Mode Description Incoming Bitstream or SignalVariants are available Dolby Digital 2.0 orSee below DTS Neo6Presentation DTS Neo6 96kHz processing LogicUsing the Remote Control With the Test Tone Setting Channel Output Levels ManuallyUsing the Front-Panel Controls Using the Full-OSD MenuSystem Settings Dim Function Advanced Remote Control FunctionsPunch-Through Programming MacrosProcessor Reset Resetting the RemoteMemory Press the Surround Button to erase the macroTroubleshooting Guide DTS AVR 145 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsVideo Bridge/DMP Tape Tuner Channel Title Video InputTable A6 Remote Control Codes Table A7 System SettingsVideo Cable, Satellite Remote Control Function List Reference DVD CD/CD-R FAV Aiwa Logik Teknika Aiwa Realistic Adcom RCX Alphastar ABC Rembrant

AVR 145 specifications

The Harman-Kardon AVR 145 is a compact yet powerful audio/video receiver designed to deliver an exceptional home theater experience. Launched to meet the needs of both music enthusiasts and movie lovers, the AVR 145 combines advanced technology with user-friendly features, making it a popular choice for those seeking quality sound and versatility.

One of the standout features of the AVR 145 is its impressive power output. The receiver delivers up to 50 watts per channel at 8 ohms, allowing it to produce rich and immersive audio across various media formats. This output ensures that even the most bass-heavy soundtracks and delicate dialogue are rendered with clarity and precision, enhancing the overall listening experience.

Harman-Kardon is known for its commitment to quality sound, and the AVR 145 is no exception. It supports multiple audio formats, including Dolby Digital and DTS, which provide surround sound capabilities that make movies feel like a cinematic experience at home. The receiver also includes High Definition Multimedia Interface (HDMI) inputs, supporting high-resolution video signals while simplifying connectivity between devices.

In terms of connectivity, the AVR 145 is equipped with several inputs and outputs, allowing users to connect multiple audio and video sources. It features composite video, component video, and multiple optical and coaxial digital audio inputs, making it compatible with various devices such as DVD players, game consoles, and media streaming devices. This versatility ensures that users can easily integrate the AVR 145 into their existing entertainment systems.

The user interface of the AVR 145 is thoughtfully designed, making it easy for users to navigate through settings and inputs. The built-in on-screen display offers a straightforward setup experience, and the remote control is intuitive for effortless operation. Additionally, the receiver includes a stereo mode for those who prefer a two-channel audio experience, catering to both modern surround sound setups and traditional stereo configurations.

Another notable characteristic of the AVR 145 is its compact design. With a sleek and elegant appearance, it fits seamlessly into any home entertainment setup without taking up excessive space. This aesthetic appeal, combined with its robust performance, positions the AVR 145 as a brilliant choice for anyone looking to enhance their audio experience without the bulk.

In summary, the Harman-Kardon AVR 145 stands out as a remarkable A/V receiver that combines powerful performance, versatile connectivity, and user-friendly design. Whether for movies, music, or gaming, it is an excellent addition to any home theater system, providing a reliable and high-quality audio experience for years to come.
Top Page Image Contents