Harman-Kardon AVR 145 Antennas, RS-232 Serial Port, FM antenna uses a 75-ohm F-connector

Page 17

CONNECTIONS

S-video, or “separate” video, transmits the chrominance and luminance components using separate wires contained within a single cable. The plug on an S-video cable contains four metal pins, plus a plastic guide pin. Be careful to line up the plug correctly when you insert it into the jack on the receiver, source or video display.

Composite video cable

Figure 10 – S-Video

Component video separates the video signal into three components – one luminance (“Y”) and two subsampled color signals (“Pb” and “Pr”) – that are transmitted using three separate cables. The “Y” cable is color- coded green, the “Pb” cable is colored blue and the “Pr” cable is col- ored red.

Component video cable

Figure 11 – Component Video

If it’s available on your video display, component video is recom- mended as the best quality connection, followed by S-video and then composite video.

Antennas

The AVR 145 uses separate terminals for the included FM and AM antennas that provide proper reception for the tuner.

The FM antenna uses a 75-ohm F-connector.

Figure 12 – FM Antenna

The AM loop antenna needs to be assembled. Then connect the two leads to the screw terminals on the receiver.

Figure 13 – AM Antenna

RS-232 Serial Port

The RS-232 serial port on the AVR 145 is used only for data. If Harman Kardon releases a software upgrade for the receiver’s operating system at some time in the future, the upgrade may be downloaded

to the AVR using this port. Complete instructions will be provided at that time.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents AVR Table of Contents Time Safety InformationWhen replacement parts are required, be Important Safety Information Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Switch Select Surround Tuning Preset Stations Headphone DigitalMessage Display Source Video InputsREAR-PANEL Connections Video Coaxial Digital RS-232 Inputs Inputs 1 DMP Input Reset ModeMonitor Bridge RS-232 AM AntennaBridge/DMP Controls an iPod docked in The Bridge Remote Control FunctionsVideo 3 Controls televisions and other video displays AM/FM Remote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRTypes of Cables Speaker CablesDigital Audio Audio ConnectionsVideo Connections Analog AudioRS-232 Serial Port FM antenna uses a 75-ohm F-connectorAntennas SUB Speaker PlacementStep One Connect the Speakers InstallationStep Three Connect the Antennas Step Four Connect the Source ComponentsVideo 1 Source Video 2 Source Installation StepsVideo 3 Source TapeStep Seven Insert Batteries in Remote Step Six Plug in AC PowerStep Five Connect Video Display Tape Cassette Turn on your source deviceEnter a code from above Two steps are required the first time you turn on the AVR Step Nine Turn On the AVRStep One Determine Speaker Size Initial SetupUsing the On-Screen Menu System Step Two Measure Speaker Distances Step Three Manual Setup MenuSpeaker Size Menu Press the Set Button to display the Speaker Size submenuSpeaker Crossover Menu Speaker/Channel Input IndicatorsStep Four EzSet Output Level Calibration Delay Adjust MenuAdvanced users may rerun EzSet for each mode individually Step Five Configure SourcesThis is the last step in the configuration process You are now ready to begin enjoying your new receiver Volume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionAudio Input Selection Using the TunerVideo Input Selection Channel Direct InputsUse the Numeric Keys to enter the desired preset number Using TheBridgeTMRecording Radio stations may be selected in one of four waysAdvanced Functions Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Surround Select Menu Screen Night Mode Dolby Surround SettingsDefault Modes UpsamplingSee below Surround Mode Description Incoming Bitstream or SignalVariants are available Dolby Digital 2.0 orSee below DTS Neo6Presentation DTS Neo6 96kHz processing LogicUsing the Remote Control With the Test Tone Setting Channel Output Levels ManuallyUsing the Front-Panel Controls Using the Full-OSD MenuSystem Settings Dim Function Advanced Remote Control FunctionsPunch-Through Programming MacrosProcessor Reset Resetting the RemoteMemory Press the Surround Button to erase the macroTroubleshooting Guide DTS AVR 145 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsVideo Bridge/DMP Tape Tuner Channel Title Video InputVideo Cable, Satellite Table A6 Remote Control CodesTable A7 System Settings Remote Control Function List Reference DVD CD/CD-R FAV Aiwa Logik Teknika Aiwa Realistic Adcom RCX Alphastar ABC Rembrant

AVR 145 specifications

The Harman-Kardon AVR 145 is a compact yet powerful audio/video receiver designed to deliver an exceptional home theater experience. Launched to meet the needs of both music enthusiasts and movie lovers, the AVR 145 combines advanced technology with user-friendly features, making it a popular choice for those seeking quality sound and versatility.

One of the standout features of the AVR 145 is its impressive power output. The receiver delivers up to 50 watts per channel at 8 ohms, allowing it to produce rich and immersive audio across various media formats. This output ensures that even the most bass-heavy soundtracks and delicate dialogue are rendered with clarity and precision, enhancing the overall listening experience.

Harman-Kardon is known for its commitment to quality sound, and the AVR 145 is no exception. It supports multiple audio formats, including Dolby Digital and DTS, which provide surround sound capabilities that make movies feel like a cinematic experience at home. The receiver also includes High Definition Multimedia Interface (HDMI) inputs, supporting high-resolution video signals while simplifying connectivity between devices.

In terms of connectivity, the AVR 145 is equipped with several inputs and outputs, allowing users to connect multiple audio and video sources. It features composite video, component video, and multiple optical and coaxial digital audio inputs, making it compatible with various devices such as DVD players, game consoles, and media streaming devices. This versatility ensures that users can easily integrate the AVR 145 into their existing entertainment systems.

The user interface of the AVR 145 is thoughtfully designed, making it easy for users to navigate through settings and inputs. The built-in on-screen display offers a straightforward setup experience, and the remote control is intuitive for effortless operation. Additionally, the receiver includes a stereo mode for those who prefer a two-channel audio experience, catering to both modern surround sound setups and traditional stereo configurations.

Another notable characteristic of the AVR 145 is its compact design. With a sleek and elegant appearance, it fits seamlessly into any home entertainment setup without taking up excessive space. This aesthetic appeal, combined with its robust performance, positions the AVR 145 as a brilliant choice for anyone looking to enhance their audio experience without the bulk.

In summary, the Harman-Kardon AVR 145 stands out as a remarkable A/V receiver that combines powerful performance, versatile connectivity, and user-friendly design. Whether for movies, music, or gaming, it is an excellent addition to any home theater system, providing a reliable and high-quality audio experience for years to come.
Top Page Image Contents