Harman-Kardon AVR 145 owner manual Installation Steps, Video 2 Source, Video 3 Source, Tape

Page 21

INSTALLATION STEPS

NOTE: It isn’t possible to make recordings using component video connections. Keep this in mind as you connect other source devices that you may wish to make recordings from.

Video 2 Source

The Video 2 source is used only for playback, never recording. The AVR 145 remote control is programmed to operate many brands and models of cable and satellite television devices, and we recommend connecting your cable or satellite set-top box to this source.

Referring to Table 2, connect your set-top box to the Video 2 Analog Audio inputs and to the Optical 1 Digital Audio input. If possible, use the Component Video 2 inputs. Otherwise, connect the set-top box’s S-video or composite video output to the matching Video 2 video input.

DVD

The DVD source is used for a DVD player. If you have a more advanced multichannel device, such as a Blu-ray Disc or HD-DVD player, connect it to the DVD source.

Referring to Table 2, connect your DVD player to the DVD Analog Audio inputs and to the Coaxial 1 Digital Audio input. If possible, use the Component Video 1 inputs. Otherwise, connect the DVD player’s S-video or composite video output to the matching DVD video input.

Figure 21 – DVD A/V, DIgital Audio and Component Video Inputs

If your DVD player plays multichannel lossless discs, such as SACD or DVD-Audio, you will also need to connect the 6-channel analog audio outputs on the DVD player to the 6-channel analog audio inputs on the receiver in order to enjoy these discs to their fullest.

Figure 19 – Video 2 A/V, DIgital Audio and Component Video Inputs

NOTE: If you receive your television programming using your TV with an antenna or direct cable connection, then you will need to connect the analog and optical digital audio (if available on your TV) outputs to the Video 2 Analog Audio inputs and to the Optical 1 Digital Audio input. Do not connect any video output on the television set to any video input on the receiver. See Step Five for information on connecting the receiver’s video monitor outputs to the television.

Figure 22 – 6-Channel Analog Audio Inputs

CD

The CD source is used for a strictly audio device, such as a CD player.

Referring to Table 2, connect your CD player to the CD Analog Audio inputs and to the Coaxial 2 or Optical 2 Digital Audio input.

Video 3 Source

The Video 3 source is used only for playback, never recording. It is also generally reserved for components that are only temporarily connected to the receiver, such as cameras and game consoles. When not in use, you may place the supplied covers over the front-panel Video 3 jacks for a cleaner appearance. Simply snap the covers in place. When you wish to use the jacks, gently press on the left side of each cover to pivot it out for removal.

Referring to Table 2, connect your camera or game console to the Video 3 Analog Audio inputs and to either the Coaxial 3 or Optical 3 digital audio input. If possible, use the Component Video 2 inputs. Otherwise, connect the component’s S-video or composite video output to the matching Video 3 video input.

Figure 20 – Video 3 A/V and Digital Audio Inputs

Figure 23 – CD Audio Inputs and Digital Audio Inputs

No video connections are made, although if your system has unusual requirements, you may connect a video device using component video outputs to the Component Video 2 inputs on the receiver, if those jacks are not in use by another device.

Tape

The Tape source is used for audio-only recorders, such as a CDR, MiniDisc or cassette deck.

Referring to Table 2, connect your recorder to the Tape Analog Audio inputs and outputs, and to either the Coax 2 or Optical 2 Digital Audio input (and corresponding digital audio output).

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents AVR Table of Contents Safety Information When replacement parts are required, beTime Important Safety Information Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Switch Select Surround Tuning Preset Stations Headphone DigitalMessage Display Source Video InputsREAR-PANEL Connections Video Coaxial Digital RS-232 Inputs Inputs 1 DMP Input Reset ModeMonitor Bridge RS-232 AM AntennaRemote Control Functions Video 3 Controls televisions and other video displaysBridge/DMP Controls an iPod docked in The Bridge AM/FM Remote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRTypes of Cables Speaker CablesDigital Audio Audio ConnectionsVideo Connections Analog AudioFM antenna uses a 75-ohm F-connector AntennasRS-232 Serial Port SUB Speaker PlacementStep One Connect the Speakers InstallationStep Three Connect the Antennas Step Four Connect the Source ComponentsVideo 1 Source Video 2 Source Installation StepsVideo 3 Source TapeStep Six Plug in AC Power Step Five Connect Video DisplayStep Seven Insert Batteries in Remote Turn on your source device Enter a code from aboveTape Cassette Two steps are required the first time you turn on the AVR Step Nine Turn On the AVRInitial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Two Measure Speaker Distances Step Three Manual Setup MenuSpeaker Size Menu Press the Set Button to display the Speaker Size submenuSpeaker Crossover Menu Speaker/Channel Input IndicatorsStep Four EzSet Output Level Calibration Delay Adjust MenuStep Five Configure Sources This is the last step in the configuration processAdvanced users may rerun EzSet for each mode individually You are now ready to begin enjoying your new receiver Volume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionAudio Input Selection Using the TunerVideo Input Selection Channel Direct InputsUse the Numeric Keys to enter the desired preset number Using TheBridgeTMRecording Radio stations may be selected in one of four waysAdvanced Functions Selecting a Surround ModeAnalog Audio Signals Digital Audio SignalsAudio Processing and Surround Sound Surround Select Menu Screen Night Mode Dolby Surround SettingsDefault Modes UpsamplingSee below Surround Mode Description Incoming Bitstream or SignalVariants are available Dolby Digital 2.0 orSee below DTS Neo6Presentation DTS Neo6 96kHz processing LogicUsing the Remote Control With the Test Tone Setting Channel Output Levels ManuallyUsing the Front-Panel Controls Using the Full-OSD MenuSystem Settings Dim Function Advanced Remote Control FunctionsPunch-Through Programming MacrosProcessor Reset Resetting the RemoteMemory Press the Surround Button to erase the macroTroubleshooting Guide DTS AVR 145 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsVideo Bridge/DMP Tape Tuner Channel Title Video InputTable A6 Remote Control Codes Table A7 System SettingsVideo Cable, Satellite Remote Control Function List Reference DVD CD/CD-R FAV Aiwa Logik Teknika Aiwa Realistic Adcom RCX Alphastar ABC Rembrant

AVR 145 specifications

The Harman-Kardon AVR 145 is a compact yet powerful audio/video receiver designed to deliver an exceptional home theater experience. Launched to meet the needs of both music enthusiasts and movie lovers, the AVR 145 combines advanced technology with user-friendly features, making it a popular choice for those seeking quality sound and versatility.

One of the standout features of the AVR 145 is its impressive power output. The receiver delivers up to 50 watts per channel at 8 ohms, allowing it to produce rich and immersive audio across various media formats. This output ensures that even the most bass-heavy soundtracks and delicate dialogue are rendered with clarity and precision, enhancing the overall listening experience.

Harman-Kardon is known for its commitment to quality sound, and the AVR 145 is no exception. It supports multiple audio formats, including Dolby Digital and DTS, which provide surround sound capabilities that make movies feel like a cinematic experience at home. The receiver also includes High Definition Multimedia Interface (HDMI) inputs, supporting high-resolution video signals while simplifying connectivity between devices.

In terms of connectivity, the AVR 145 is equipped with several inputs and outputs, allowing users to connect multiple audio and video sources. It features composite video, component video, and multiple optical and coaxial digital audio inputs, making it compatible with various devices such as DVD players, game consoles, and media streaming devices. This versatility ensures that users can easily integrate the AVR 145 into their existing entertainment systems.

The user interface of the AVR 145 is thoughtfully designed, making it easy for users to navigate through settings and inputs. The built-in on-screen display offers a straightforward setup experience, and the remote control is intuitive for effortless operation. Additionally, the receiver includes a stereo mode for those who prefer a two-channel audio experience, catering to both modern surround sound setups and traditional stereo configurations.

Another notable characteristic of the AVR 145 is its compact design. With a sleek and elegant appearance, it fits seamlessly into any home entertainment setup without taking up excessive space. This aesthetic appeal, combined with its robust performance, positions the AVR 145 as a brilliant choice for anyone looking to enhance their audio experience without the bulk.

In summary, the Harman-Kardon AVR 145 stands out as a remarkable A/V receiver that combines powerful performance, versatile connectivity, and user-friendly design. Whether for movies, music, or gaming, it is an excellent addition to any home theater system, providing a reliable and high-quality audio experience for years to come.
Top Page Image Contents