Hague Quality Water Intl 60 SERIES Service Settings, Display Meaning Possible Values Comments

Service Settings, Cont.

Display		Meaning	Possible Values	Comments
Total		Total number of regenerations since	Cannot be reset
Regens	00000	Service Settings was last entered	00000–99999
Total		Total amount of water that has	Cannot be reset
Gallons	00000000	passed through the appliance since	00000000–99999999
		Service Settings was last entered
Mode 1		Operating (Regeneration) Mode	Mode 1	See Operating Modes
Frequency			Frequency	section that follows
			Mode 1
			Days of the Week
			Mode 2
			Demand Delayed
			Mode 3
			Demand
Days		Number of days between	00 to 12	Displays only when in
Between Regenerations 01		regenerations		Mode 1
				Frequency
Regen	SMTWTFS	Select which days to regenerate	Various combinations or Y’s	Displays only when in
Days	YYYYYYYY		and blank spaces	Mode 1
				Days of the Week
Hardness		Hardness of the water that was	003 to 999 Grains	This is the actual hardness
Grains	040	tested	(00000 to 99999 mg/L)	reading and is not
				compensated for iron
Iron		Amount of iron in parts per million of	00 to 99 ppm (mg/L)	This value is used to
ppm	00	the water that was tested		calculate compensated
				hardness automatically
Manganese		Amount of manganese in parts per	00 to 99 ppm (mg/L)	This value is used to
ppm	00	million of incoming water		calculate compensated
				hardness automatically
Salt Type		Regenerant filling the brine tank	Sodium
Sodium			Potassium
Compensated		Compensated hardness using the	Cannot be set	The formula used is:
Hardness	00040	hardness, iron, and manganese	ppm or (mg/L)	Hardness + (4 x each ppm
		settings		iron) + (4 x each ppm
				manganese) =
				compensated hardness
Capacity		The desired capacity number	00000 to 99999 Grains
Grains	28730		(0000 to 9999 gm)

WaterMax 60 Series Owner’s Manual 11/10/2008 16