Hague Quality Water Intl Complete Guide to Hague Water Max Filters Service Settings

Page 17

Service Settings, Cont.

Display		Meaning	Possible Values	Comments
72–96 Hour		A way to force regeneration at	No (or Yes, for iron)	See 72–96 Hour
Regeneration	No	regularly-scheduled intervals		Regeneration that follows.
				Displays only when in
				Modes 2 or 3
Distiller/RO	No	Indicates if a distiller or reverse	No (or Yes if a distiller or	Displays only when in
		osmosis appliance is plumbed to use	reverse osmosis appliance	Mode 2
		filtered water from the appliance	is used)
Backwash 1	01.0	Number of minutes the first backwash	00.0 to 99.9	Set to the nearest tenth of
		cycle lasts		a minute
Brine/Rinse	30.0	Number of minutes the first brine and	00.0 to 99.9	Set to the nearest tenth of
		slow rinse cycle lasts		a minute
Backwash 2	05.0	Number of minutes the second	00.0 to 99.9	Set to the nearest tenth of
		backwash cycle lasts		a minute
Salt per		Amount of salt set to be used in each	00.0 to 99.9 lb (kg)	Set to the nearest tenth
Regen lbs.	06.2	regeneration to achieve the capacity
		setting
Turbine Pulses		Used by qualified personnel for	Normal
Normal		diagnostic purposes	Test Mode
Regenerate		Sets the appliance to regenerate	No or Yes	If set to Yes, it will force a
Tonight	Yes	tonight		regeneration at the next
				set regeneration time
				(such as 02:00 AM). After
				the regeneration, the value
				will be set to No.
				Displays only when in
				Modes 1 or 2

WaterMax 60 Series Owner’s Manual

11/10/2008

17

Image 17

Contents Series Number Owner Pays for Year Limited WarrantyContents For Owner’s Reference General InformationSix-Button Controller Getting Maximum Efficiency From the ApplianceController Part Function Six-Button Controller,Set Time of Day Customer SettingsSet Regeneration Time Set Number of PeopleIron Type Description Checklist Before InstallationDo Not PrecautionsPrepare the Placement Area Installation Steps and Start-Up ProceduresInstallation Steps and Start-Up Procedures, Check for Leaks Set Up the ControllerPlug in the Transformer Add Water to the Brine TankBypass Valve Complete the Installation Regenerate Button Setting and Using the Controller Blending Valve Meaning Possible Values Comments Service SettingsDisplay Meaning Possible Values Comments Service Settings,See 72-96 Hour Operating Modes Mode 1-Timer Mode62AKQ Mode 1 Timer Mode Setting ChartNA, See Mode 1 Setting Chart Mode 2 Demand Delayed Mode Setting ChartModes 1 Salt DepthsTools and Materials Needed 62AJQ Replenishment ProcedureReplenishment Procedure Add Replenishment Media 62AJQ Replenishment Procedure,Refill Tank With Water Replace Fill PlugRegeneration Cycle Frequency Worksheet 61AAN WaterMax Iron Filter Sizing FormulaDetermine Monthly Usage Water ExampleIron Filter and Potassium Feeder Placement Iron Filter and Potassium Feeder Installation GuideStart-Up Procedures for 4-oz Potassium Permanganate Feeder Incorrect Correct Assembly and PartsCabinet and Cover Assemblies Brine Tank Assembly Assembly and Parts,Description Quantity Cabinet and AssembliesInjector Assembly Injector AssemblyScreen 93810 Injector93223 Injector ThroatBypass Assembly Bypass AssemblyPiston Assembly HousingSensor Wire AssemblyDrive End Cap Assembly Drive End Cap Assembly90217 Valve HousingDrive Motor 93238 Drive GearConcave side Static O-Ring Brine Valve Housing Assembly90843 0.5 gpm BrineFlow Control End CapRetainer Drain End Cap AssemblyH2086 Drain Line Safety Shutoff Assembly Safety Shutoff AssemblySafety Shutoff Valve Elbow Installation Safety Shutoff Valve Elbow InstallationFill Plug Fill Plug AssemblyProblem Possible Cause Solution TroubleshootingTroubleshooting, Efficiency Statements Reading Model NumbersNumber or Letter Letter Media TypeSeries 63MAQ1 63BEQ1,2 63MXQ1 WaterMax Water Conditioner Specifications62AMQ1 62APQ1 62AJQ3Filter Purpose WaterMax Filter SpecificationsCertificates Certificates, Certificates, Page Page Series