Service Settings, Cont.
Mode 2 (Demand Delayed Mode) Setting Chart
This section provides guidance for using different service settings to achieve the desired capacity. Note: Mode 2 and Mode 3 have the same settings. Mode 3 is NOT recommended for residential use.
| 60 Series | 63MAQ1 | 63BEQ1,2 | 63MXQ1 | 63MDQ3 | 62AMQ1 | 62APQ1,3,4 | 62AKQ3 | 62AJQ3,5 |
| Mode 2 | Yes | Yes | Yes | No | Yes | No | No | No |
| Capacity | As | As | As | — | As | — | — | — |
| required | required | required | required | |||||
|
|
|
|
|
| ||||
| 96 hour regeneration | Yes or No | Yes or No | Yes or No | — | Yes or No | — | — | — |
| (if iron | ||||||||
|
|
|
|
|
|
|
|
| |
| #1 Salt Setting |
|
|
|
|
|
|
|
|
| Backwash 1 (minutes) | 1 | 1 | 16 | — | 26 | — | — | — |
| Brine/Rinse (minutes) | 7 | 7 | 7 | — | 7 | — | — | — |
| Backwash 2 (minutes) | 3 | 3 | 3 | — | 2 | — | — | — |
| Capacity (grains) @ | 5,900 @ | 5,900 @ | 8,400 @ | — | 5,200 @ | — | — | — |
| salt (lb) | 1.1 lb | 1.1 lb | 1.6 lb | 1 lb | ||||
|
|
|
|
| |||||
| #2 Salt Setting |
|
|
|
|
|
|
|
|
| Backwash 1 (minutes) | 1 | 1 | 16 | — | 26 | — | — | — |
| Brine/Rinse (minutes) | 12 | 12 | 19 | — | 12 | — | — | — |
| Backwash 2 (minutes) | 3 | 3 | 3 | — | 2 | — | — | — |
| Capacity (grains) @ | 16,300 @ | 16,300 @ | 20,000 @ | — | 11,900 @ | — | — | — |
| salt (lb) | 3.2 lb | 3.2 lb | 4.2 lb | 2.7 lb | ||||
|
|
|
|
| |||||
| #3 Salt Setting |
|
|
|
|
|
|
|
|
| Backwash 1 (minutes) | 1 | 1 | 17 | — | 27 | — | — | — |
| Brine/Rinse (minutes) | 30 | 30 | 47 | — | 30 | — | — | — |
| Backwash 2 (minutes) | 3 | 3 | 3 | — | 2 | — | — | — |
| Capacity (grains) @ | 26,700 @ | 26,700 @ | 38,700 @ | — | 23,100 @ | — | — | — |
| salt (lb) | 6.2 lb | 6.2 lb | 9.6 lb | 6.2 lb | ||||
|
|
|
|
| |||||
| #4 Salt Setting8 |
|
|
|
|
|
|
|
|
| Backwash 1 (minutes) | 1 | 1 | 17 | — | 47 | — | — | — |
| Brine/Rinse (minutes) | 45 | 45 | 60 | — | 45 | — | — | — |
| Backwash 2 (minutes) | 3 | 3 | 3 | — | 2 | — | — | — |
| Capacity (grains) @ | 32,500 @ | 32,500 @ | 49,300 @ | — | 30,000 @ | — | — | — |
| salt (lb) | 9.5 lb | 9.5 lb | 14.4 lb | 9.3 lb | ||||
|
|
|
|
|
1Models 63MAQ, 63BEQ, 63MXQ, 62AMQ and 62APQ are certified by WQA. All other models are not tested or certified by WQA
2Municipally supplied chlorinated water only.
3NA, See Mode 1 Setting Chart.
4Model has no backwash flow control button or retainer. Must have a minimum of 7 gpm @ 30 psi available for proper backwash. See Mode 1 Setting Chart.
5Calcite will add additional hardness to water before softening.
6If iron is present in water supply, use salt setting #3 or #4.
7If iron is present in the water supply, set Backwash 1 to 7 minutes.
8Do not use this salt setting in California.
WaterMax 60 Series Owner’s Manual | 11/10/2008 | 20 |