Hague Quality Water Intl 60 SERIES manual Safety Shutoff Valve Elbow Installation

Page 40

Assembly and Parts, Cont.

Safety Shutoff Valve Elbow Installation

3/8" Plastic Gripper	3/8" Nut
3/8" Retainer Sleeve
3/8" Plastic Insert
Safety Shutoff Valve	3/8" Poly Tube
Hex Nut	2
Hex Nut

Wrist Pin

1/2" Retainer Sleeve

1/2" Plastic Gripper

1

1/2" Nut

Air Check/Draw Tube

Figure 18: Safety Shutoff Valve Elbow Installation

	Part #	Description	Quantity
1	54112	1/2" Compression Assembly	1
2	54138	3/8" Compression Assembly	1

The nut, gripper, and retainer sleeve are a three-piece assembly that can come apart if removed from the elbow body. Parts must be reassembled exactly as shown to function properly.

When connecting the 3/8" poly tube, first assemble the nut, gripper, and retainer sleeve on the tubing. Then insert the plastic insert. Screw the nut on the elbow body. With a wrench, tighten the nut securely to create a water-tight connection.

WaterMax 60 Series Owner’s Manual

11/10/2008

40

Image 40

Contents Series Year Limited Warranty Number Owner Pays forContents General Information For Owner’s ReferenceGetting Maximum Efficiency From the Appliance Six-Button ControllerSix-Button Controller, Controller Part FunctionCustomer Settings Set Time of DaySet Regeneration Time Set Number of PeopleChecklist Before Installation Iron Type DescriptionPrecautions Do NotInstallation Steps and Start-Up Procedures Prepare the Placement AreaInstallation Steps and Start-Up Procedures, Set Up the Controller Check for LeaksPlug in the Transformer Add Water to the Brine TankComplete the Installation Bypass ValveBlending Valve Setting and Using the ControllerRegenerate Button Service Settings Meaning Possible Values CommentsService Settings, Display Meaning Possible Values CommentsSee 72-96 Hour Mode 1-Timer Mode Operating ModesMode 1 Timer Mode Setting Chart 62AKQMode 2 Demand Delayed Mode Setting Chart NA, See Mode 1 Setting ChartSalt Depths Modes 1Replenishment Procedure 62AJQ Replenishment ProcedureTools and Materials Needed 62AJQ Replenishment Procedure, Add Replenishment MediaRefill Tank With Water Replace Fill Plug61AAN WaterMax Iron Filter Sizing Formula Regeneration Cycle Frequency WorksheetDetermine Monthly Usage Water ExampleIron Filter and Potassium Feeder Installation Guide Iron Filter and Potassium Feeder PlacementStart-Up Procedures for 4-oz Potassium Permanganate Feeder Cabinet and Cover Assemblies Assembly and PartsIncorrect Correct Assembly and Parts, Brine Tank AssemblyCabinet and Assemblies Description QuantityInjector Assembly Injector Assembly93810 Injector Screen93223 Injector ThroatBypass Assembly Bypass AssemblyHousing Piston AssemblySensor Wire AssemblyDrive End Cap Assembly Drive End Cap AssemblyValve Housing 90217Drive Motor 93238 Drive GearBrine Valve Housing Assembly Concave side Static O-Ring Brine 90843 0.5 gpm Flow Control End CapH2086 Drain Line Drain End Cap AssemblyRetainer Safety Shutoff Assembly Safety Shutoff AssemblySafety Shutoff Valve Elbow Installation Safety Shutoff Valve Elbow InstallationFill Plug Assembly Fill PlugTroubleshooting Problem Possible Cause SolutionTroubleshooting, Reading Model Numbers Efficiency StatementsNumber or Letter Letter Media TypeWaterMax Water Conditioner Specifications Series 63MAQ1 63BEQ1,2 63MXQ162AMQ1 62APQ1 62AJQ3WaterMax Filter Specifications Filter PurposeCertificates Certificates, Certificates, Page Page Series