Mitsubishi Electronics PE-8MYC, PE-15MYC, PE-20MYC, PE-10MYC, PEH-10MYA PEH-10,15,20MYA Heat pump

PEH-10,15,20MYA									Heat pump
Model name				PEH-10MYA			PEH-15MYA		PEH-20MYA
Service				PEH-10MYA-EU			PEH-15MYA-EU		PEH-20MYA-EU
reference
Power supply	Indoor					3PH 4W380 ~ 415V 50Hz
	Outdoor					3PH 4W380 ~ 415V 50Hz
Total cooling capacity			kW	28.8			44.0		57.6
			Btu/h	98,300			150,200		196,600
			kcal/h	24,800			37,900		49,600
Sensible cooling capacity			kW	23.0			35.2		46.0
			Btu/h	78,500			120,200		157,000
			kcal/h	19,800			30,200		39,600
Sensible heating capacity			kW	28.8			44.0		57.6
			Btu/h	98,300			150,200		196,600
			kcal/h	24,800			37,800		49,500
Capacity step			%	0-100			0-50-100
Refrigerant						R-22
Refrigerant charge			kg	9.9			2 ✕ 6.6		2 ✕ 9.7
Refrigerant control						Capillary tube
Indoor Unit	Model name			PEH-10MYA			PEH-15MYA		PEH-20MYA
	Service			PEH-10MYA-EU			PEH-15MYA-EU		PEH-20MYA-EU
	reference
External finish						Galvanized steel
Dimension	Height		mm	428				706
	Width		mm	1,615			1,690		1,993
	Depth		mm	650				865
Net weight			kg		84		180		212
Indoor coil						Cross fin coil
Indoor fan				Centrifugal (Galvanized) - Direct drive			Centrifugal (Galvanized) - Belt drive
Indoor fan motor						Three phase induction motor
No. ✕ Motor output			kW	1 ✕ 1.0			1 ✕ 2.2		1 ✕ 3.7
Indoor fan air flow			CMM		90		140		180
			CFM	3,179			4,945		6,358
			L/S	1,500			2,333		3,000
External static			mmAq	12.5				20
pressure			Pa	125				200
Sound pressure level			dB(A)		59		61		62
Drain connection			mm		25.4
Outdoor unit	Model name			PUH-10MYC		PUH-10MYE	PUH-15MYC		PUH-20MYC
	Service			PUH-10MYC1-EU(S)		PUH-10MYE-EU	PUH-15MYC1-EU(S)		PUH-20MYC1-EU(S)
	reference
External finish						Acrylic resin coating
Color						Munsell 5Y 8/1
Dimension	Height		mm	980		1,175	1,200
	Width		mm	1,400		1,250	1,951
	Depth		mm	700		550	1,080
Net weight			kg	240		221	431		472
Compressor						Hermetic line start(reciprocating)
No. ✕ Motor output			kW	1 ✕ 7.5			2 ✕ 5.5		2 ✕ 7.5
Outdoor coil						Cross fin coil
Outdoor fan						Propeller-Direct drive
Outdoor fan motor						Three phase induction motor
No. ✕ Motor output			kW	2 ✕ 0.15		0.35	2 ✕ 0.35
Outdoor fan air flow			CMM	190		200	2 ✕ 185
			CFM	6,711		7,063	2 ✕ 6,534
			L/S	3,167		3,333	2 ✕ 3,083
Sound pressure level			dB(A)		65			69
Protection devices				High pressure switch,	freeze & frost protection, Fuse
				Over current relay (comp & indoor fan, outdoor fan)
				Internal thermostat (comp & indoor fan, outdoor fan)
Note 1. Cooling and heating capacities are based on the following conditions.
Cooling		indoor; 27˚CDB, 19˚CWB, outdoor :35˚CDB
Heating		indoor; 21˚CDB,		outdoor :7.0˚CDB, 6.0˚CWB
Cooling and heating capacities are based 5m pipe length.

2.Refergirant charge volumes are factory charged (at 5m piping length).Refrigerant is enclosed with the outdoor unit.

3.Capacity is gross capacity which do not include a deduction for evaporator fan motor heat.

4.The measuring point of the Sound pressure level is 1m from the unit surface.

5.Specification subject to change without notice.

- 10 -