Drawer Removal and Replacement
To remove the drawer:
1.Push the drawer completely closed.
2.Lift up the front of the drawer and pull it straight out.
To replace the drawer:
1.Push the metal glide rails to the rear of the refrigerator.
2.Place the drawer onto the glide rails. While tilting the rear of the drawer upward, slide the drawer toward the rear of the refrigerator.
Drawer Divider
To remove the divider:
1.Pull the drawer out to its full extension.
2.Lift the front of the divider and lift the divider out.
To replace the divider:
1.Position the divider so that the features on the bottom of the divider align with the matching features in the drawer.
2.Lower the divider into place.
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
Fresh fish or shellfish | use same day as purchased | |
Chicken, ground beef, variety meats (liver) | ...................... | |
Cold cuts, steaks/roasts | ||
Cured meats |
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.
Features
DOOR FEATURES
Door Bins
To remove and replace the bins:
1. Remove the bin by lifting it up and pulling it straight out.
2.Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
FREEZER FEATURES
Pizza Pocket and Drawer Divider |
| |
The drawer divider is not removable. For storage flexibility, the | A | |
divider can be moved a few inches to either side allowing you to | ||
| ||
store larger items in one section of the freezer drawer. |
|
B
A. Drawer divider
B. Pizza pocket
25