Electrolux Over The Range Microwave Oven C1. Preparing the Rear Wall, For Outside Back Exhaust

Page 18

Installation Instructions

C. OUTSIDE BACK EXHAUST (Horizontal Duct)

INSTALLATION OVERVIEW
C1.	Prepare Rear Wall
C2.	Attach Mounting Plate to Wall
C3.	Prepare Top Cabinet
C4.	Adjust Blower
C5.	Mount the Microwave Oven
C1. PREPARING THE REAR WALL		C2. ATTACH THE MOUNTING PLATE

FOR OUTSIDE BACK EXHAUST

TO THE WALL

You need to cut an opening in the rear wall for outside exhaust.

		Attach the plate to the wall using toggle bolts. At least
		one wood screw must be used to attach
		the plate to a wall stud.
	C	1. Remove the toggle wings from the bolts.
	C	2. Insert the bolts into the mounting plate through
	L	2. Insert the bolts into the mounting plate through
	• Read the instructions on the REAR WALL	the holes designated to go into drywall and
	• Read the instructions on the REAR WALL	reattach the toggle wings to ¾ " onto each bolt.
	TEMPLATE.	reattach the toggle wings to ¾ " onto each bolt.
	TEMPLATE.

•Tape it to the rear wall.

•Cut the opening, following the instructions of the

REAR WALL TEMPLATE.

Image 18

Contents Installation Instructions Before YOU BeginContents Important Safety Instructions Electrical RequirementsOutside Back Exhaust Example only Hood ExhaustOutside TOP Exhaust Example only Duct Pieces Equivalent Number Length UsedMaximum duct length Exhaust connectionHardware Packet Damage SHIPMENT/ InstallationParts Included Additional PartsTools YOU will Need Mounting SpacePlacement of the Mounting Plate Finding the Wall StudsMicrowave Must be Connected to AT Least ONE Wall Stud Determining Wall Plate Location Under Your Cabinet Microwave Must be LevelAligning the Wall Plate Horizontal LineHole B Horizontal Line Outside Back Exhaust Horizontal Duct Recirculating NON-VENTED DuctlessOutside TOP Exhaust Vertical Duct SeeA1. Attach the Mounting Plate to the Wall To use toggle boltsInstall this Microwave Oven A3. Mount the Microwave OvenTo the Wall Installation OverviewB1. Attach the Mounting Plate To help tighten the boltsB3. Adapting Microwave Blower for Outside TOP Exhaust Remove and save Lift up Screw that holdsBlower plate to Microwave B5. Mount the Microwave Oven Onto four lower tabs of mounting plateB5. Mount the Microwave Oven B6. Adjust the Exhaust AdaptorB7. Connecting Ductwork Attach the microwave oven to the top cabinetC1. Preparing the Rear Wall For Outside Back ExhaustPlate to a wall stud C3. USE TOP Cabinet Template C2. Attach the Mounting PlateTo the Wall For Preparation of TOP CabinetC5. Mount the Microwave Oven Place the blower unit back into the openingSecure the blower unit to the microwave with the screw C5. Mount the Microwave Oven Before YOU USE Your Microwave

C. OUTSIDE BACK EXHAUST (Horizontal Duct)

INSTALLATION OVERVIEW

C1. PREPARING THE REAR WALL

FOR OUTSIDE BACK EXHAUST

TO THE WALL

the plate to a wall stud.