Electrolux Over The Range Microwave Oven Damage SHIPMENT/ Installation, Parts Included

Page 6

Installation Instructions

DAMAGE – SHIPMENT/ INSTALLATION

•If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement.

•If the unit is damaged by the customer, repair or replacement is the responsibility of the customer.

•If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by arrangement between customer and installer.

PARTS INCLUDED

HARDWARE PACKET

PART	QUANTITY
Wood Screws	1
(¼" x 2")
Toggle Bolts	3
(and wing nuts)
(3/16" x 3")
Self-aligning	3
Machine Screws
(¼"-28 x 3¼")
Nylon Grommet	2
(for metal cabinets)

You will find the installation hardware contained in a packet with the unit. Check to make sure you have all these parts.

NOTE: Some extra parts are included.

ADDITIONAL PARTS

PART					QUANTITY
				Top Cabinet	1
	TOP CABINET TEMPLATE			Top Cabinet	1
				Template
				Template



				Rear Wall	1
	REAR WALL TEMPLATE			Rear Wall	1
				Template
				Template

Installation	Installation	1
Installation	Instructions
Instr	Instructions
uctions

Separately	2
Packed
Grease
Filters
Exhaust	1
adaptor

6

Image 6

Contents Installation Instructions Before YOU BeginContents Important Safety Instructions Electrical RequirementsOutside Back Exhaust Example only Hood ExhaustOutside TOP Exhaust Example only Duct Pieces Equivalent Number Length UsedMaximum duct length Exhaust connectionHardware Packet Damage SHIPMENT/ InstallationParts Included Additional PartsTools YOU will Need Mounting SpacePlacement of the Mounting Plate Finding the Wall StudsMicrowave Must be Connected to AT Least ONE Wall Stud Determining Wall Plate Location Under Your Cabinet Microwave Must be LevelAligning the Wall Plate Horizontal LineHole B Horizontal Line Outside Back Exhaust Horizontal Duct Recirculating NON-VENTED DuctlessOutside TOP Exhaust Vertical Duct SeeA1. Attach the Mounting Plate to the Wall To use toggle boltsInstall this Microwave Oven A3. Mount the Microwave OvenTo the Wall Installation OverviewB1. Attach the Mounting Plate To help tighten the boltsB3. Adapting Microwave Blower for Outside TOP Exhaust Remove and save Lift up Screw that holdsBlower plate to Microwave B5. Mount the Microwave Oven Onto four lower tabs of mounting plateB5. Mount the Microwave Oven B6. Adjust the Exhaust AdaptorB7. Connecting Ductwork Attach the microwave oven to the top cabinetC1. Preparing the Rear Wall For Outside Back ExhaustPlate to a wall stud C3. USE TOP Cabinet Template C2. Attach the Mounting PlateTo the Wall For Preparation of TOP CabinetC5. Mount the Microwave Oven Place the blower unit back into the openingSecure the blower unit to the microwave with the screw C5. Mount the Microwave Oven Before YOU USE Your Microwave