Using the Oven 25
3How to use the clock functions
•After a clock function has been selected, the corresponding function flashes for about 5 seconds. During this period, the desired times can be set or modi- fied using the 
or 
button.
•When the desired time has been set, the function continues to flash for approx. 5 seconds. After that the function is then lit. The set time begins to run.
•With Countdown the oven must also be switched on in order to set the clock function.
•By pressing 
and 
at the same time, the time set can be reset.
3Checking the time set or remaining
Press the Selection 
button repeatedly, until the appropriate clock function flashes and the time set or remaining is displayed.
2Using residual heat with the Cook time 
and End time 
clock func- tions
When the Cook time 
and End time 
clock functions are used, the oven switches the heating elements off, when 90% of the time set or calculated has elapsed. The residual heat present is used to continue the cooking process until the time set has elapsed (3 to 20 mins.).