62Cleaning and Care
5. Take hold of the door glass panels on their upper edge one after the other and take them out of the guide by pulling them up- wards.
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing up liquid. Then dry them carefully.
Putting the door glass panels back.
1. From above insert the door glass panels one after the other into the door profile at the bottom edge of the door at an angle and lower them.
3 The two smaller panels first, then the larger panel.
2. Take hold of the door trim (B) at each side, position it on the inside edge of the door and plug the door trim (B) into the upper edge of the door.