12Operating the hob
After approx. 5 seconds, the flashing stops and the clock displays the time set.
The appliance is now ready to use.
3The time can only be changed if no auto
matic function (Cook time 
or End time 
) has been set.
Initial Cleaning
You should clean the appliance thoroughly before using for the first time. Wipe the glass ceramic cooking surface with a damp cloth.
1Attention: Do not use sharp or abrasive cleaning materials. These could damage the surface.
3For appliances with metal fronts, use normal commercially available cleaning agents.
1.Turn the oven functions dial to Light 
.
2.Remove all accessories and the side rails and clean with warm water and wash ingid.
3.Wash the oven in the same way, with warm water and washing dry it.
4.Wipe the front of the appliance with a damp cloth.
Operating the hob
3When a cooking zone is switched on, it may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance.
Heat settings
•Heat settings can be set from 1.
•Intermediate positions are possible for settings 27.
1= lowest output
9 = highest output
= double ring switching