Viking DMOD241SS manual Before Operating, To Set The Clock, Timer, Stop/clear

Before Operating

Before operating your new DrawerMicro Oven make sure you read and un- derstand this Use and Care Guide completely.

• Before the DrawerMicro Oven can be used, follow these steps:

1. Plug in the DrawerMicroOven. ENJOY YOUR MICRO- WAVE TOUCH

CLEAR AND TOUCH CLOCK will appear.

2.Touch the Stop/Clear pad.

3.Set clock.

:

will appear.

To Set The Clock

1.Touch Timer/Clock pad and number 2.

2.Touch number pads for correct time of day and touch Timer/Clock pad again.

This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the Stop/Clear pad and re-enter the time.

•If the electrical power supply to your DrawerMicro Oven should be inter- rupted, the display will intermittently show ENJOY YOUR MICRO- WAVE

TOUCH CLEAR	AND	TOUCH CLOCK after the power is reinstated. If
this occurs during cooking, the program will be erased. The time of day

will also be erased. Simply touch Stop/Clear pad and reset the clock for the correct time of day.

Note:

•The DrawerMicro Oven can be programmed with the drawer open except for Start/Add-A-Minute .

Timer

1.Touch Timer/Clock pad and number 1.

2.Enter time.

3.Touch Timer/Clock pad again.

To cancel timer, touch Stop/Clear.

Stop/clear

Touch the Stop/Clear pad to:

1.Erase if you make a mistake during programming.

2.Cancel timer.

3.Stop the DrawerMicro Oven temporarily during timed cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice for timed cooking.

E 14