KitchenAid KESC300H To remove the decorative glass, To remove the door handle, To remove a hinge

REMOVING THE DECORATIVE GLASS, THE OVEN DOOR HANDLE, THE HINGES, AND THE OVEN DOOR GLASS

1.Remove the oven door from the range (see page 4-22 for the procedure).

2.Place the oven door on a padded work surface with the decorative glass and handle facing up and the bottom edge facing the front.

3.To remove the decorative glass:

a)Remove the four decorative glass re- tainer screws, and remove the retainer and two side trims.

b)Lift the decorative glass off the door.

Decorative Glass Retainer Screws (4)

4.To remove the door handle:

a)Lift the air vent and handle off the door.

Air Vent

Handle

b)Remove the four handle screws (two on each side) from the air vent and remove the handle.

Handle Screws (4)

5.To remove a hinge:

a)Remove the two bottom screws from the hinge you are servicing. NOTE: If you are removing both hinges, remove the steam deflector. Note how the de- flector is mounted between the two hinges.

b)Remove the bracket and retainer screw from the top of the hinge.

Bracket &

Retainer

Screw

Steam Deflector

Steam

Deflector

Bottom Hinge Screws

c)Remove the bracket, retainer, and hinge from the door.

Hinge

Retainer

Bracket

Continued on the next page.

4-23