KitchenAid KESH307H, KESC300H, KESC307H manual Problem Possible Cause Solution

PROBLEM	POSSIBLE CAUSE	SOLUTION
Cooktop element will not heat	Low line voltage.	Line voltage should be minimum
higher than low-medium.		240-volts. Electrician should re-
		pair cause for low line voltage.
	Defective cooktop element.	Test and/or replace element.
Cooktop element heats up nor-	Customer using improper cookware.	Evaluate suitability of cookware.
mally, but drops to lower setting	Defective cooktop control switch.	Test and/or replace switch.
automatically.
Indicator light does not light up.	Loose or bad wiring to indicator	Repair or replace wiring (see
	light.	wiring diagrams).
	Defective indicator light.	Replace indicator light.
	Defective cooktop control switch.	Test and/or replace switch.
Hot surface indicator light does	Loose or defective light.	Replace indicator light.
not work.	Loose or bad wiring to indicator	Replace indicator light assembly
	light assembly.	and wiring.
Oven light fails to operate.	Bulb burned out.	Replace bulb.
	Circuit breaker or fuse is open.	Check circuit breaker or replace
		fuse.
	Defective switch.	Check continuity and/or replace
		switch.
Door locks but indicator lights do	Defective indicator light.	Replace indicator light.
not light. Oven does not begin	Defective latch safety switch.	Replace switch.
clean cycle.
Electronic timer will not accept	Failed electronic board.	Replace timer.
programming.
Timer relay(s) do not close.	Loose or bad wiring to timer.	Repair or replace wiring (see
		wiring diagrams).
	Failed electronic board.	Replace timer.
Oven will not bake (selection is	If indicator light lights up bake	Check and/or replace bake ele-
set for to BAKE).	element is defective.	ment.
	Defective latch safety switch.	Check continuity and/or replace
		switch.
	Loose or bad wiring.	Repair or replace wiring (see
		wiring diagrams).
Oven will not bake (selection is	Defective electronic clock.	Check continuity and/or replace
set for TIMED BAKE).		clock (see wiring diagrams).

6-4