KitchenAid YKDRS807, KDSS907 ElectronicControlPads, OvenDisplays, Start, ControlLock, Off, Timer

GLASS TOUCH-ACTIVATED ELECTRONIC OVEN CONTROL

C

B

DE

		CLEAN	TIME
	F	PROBE TEMP
	C	HR	DELAY
ON	CONTROL		MIN
	LOCKED	COOK	TIME

MED LOW HI

FG

MIN HR	SEC MIN
	H
START	STOP
TIME	TIME

I

A

Q	P	O	N	M	L	K	J
A. EasyConvect™ conversion	G. Number pads				M. Stop time
B. Convection oven settings	H. Start (control lock)				N. Cook time (length of cooking time)
C. Oven settings	I. Off				O. Self-clean
D. Proof bread setting	J. Options selection pad				P. Oven light (on/off)
E. Oven display	K. Clock set/start				Q. Warming drawer controls
F. Clock/time of day display	L. Timer

ElectronicControlPads

When pressing any control pad function on the Electronic Oven Control, use the pad of your finger to press the desired function. Hold down the pad a few seconds, or until the desired function appears in the display.

When entering multiple functions within one setting, pause briefly between each control pad command. If a command pad is pressed several times repeatedly, the pad may briefly stop working. Wait a few seconds, and the pad should function again as normal.

OvenDisplays

When the oven is in use, this display shows the oven temperature, heat source(s) and start time. During Timed Cooking, this display also shows a timed countdown and the stop time (if entered).

If “Err” appears on the display, an invalid pad was pressed. Press OFF and retry your entry. When the oven is not in use, this display is blank.

Start

The START pad begins any oven function except the Timer, Control Lock and Sabbath Mode. If not pressed within 5 seconds after pressing a pad, “START?” will appear on the oven display as a reminder. If not pressed within 5 minutes after pressing a pad, the oven display will return to inactive mode (blank) and the programmed function will be canceled.

If a function has been started and a different function is selected, “START?” will appear in the display after 5 seconds. If the START pad is not pressed within 5 seconds, the oven display will return to the active/already started function.

ControlLock

The Control Lock feature shuts down the control panel pads to avoid unintended use of the oven.

The Control Lock feature may be used either when the range is in use or turned off (for example, during cleaning).

The Control Lock is preset unlocked, but can be locked.

When the control is locked, only the TIMER SET/START, TIMER OFF and OVEN LIGHT pads will function.

To Lock/Unlock Control: Before locking, make sure the oven, the Timer and Timed Cooking are off. Press and hold the START pad for 5 seconds until “CONTROL LOCK” appears on the display. Repeat to unlock and remove “CONTROL LOCK” from the display.

Off

The OFF pad stops any oven function except for the Warming Drawer, Clock, Timer and Control Lock.

Clock/TimerDisplay

This is a 12-hour clock.

1.Press CLOCK SET/START.

2.Press number pads to set time of day.

3.Press CLOCK SET/START

Timer

The Timer can be set in minutes and seconds or hours and minutes and counts down the set time.

NOTE: The Timer does not start or stop the oven.

1.Press TIMER SET/START.

Press again to switch from MIN/SEC and HR/MIN.

2.Press the number pads to set length of time.

11