Wolfgang Puck BFPR0007 manual Storing Your Food Processor

HSN_7CupFoodProcManual 4/20/09 10:50 AM Page 15

Storing Your Food Processor

figure 8	The Wolfgang Puck Food Processor was
	designed so that all attachments can be stored
	within the unit itself.
	Storage Drawer
	The Processing Blade, Reversible Shredding
	Disc, Reversible Grating and Shaving Disc and
	Spatula are all stored in the storage drawer.
	(The Spindle and Variable Slicing Disc are
	stored in the Processing Bowl. See next page.)
figure 9	1	Remove the storage drawer from the base
		of the food processor.
	2	Place the elevated end of the Processing
		Blade toward the front of the storage
		drawer as indicated in figure 8, and
		press down.
	3	Place one of the Reversible Discs in
		storage drawer as indicated in figure 9.
	4	Lie spatula on top of Reversible Disc in the
figure 10
		storage drawer as indicated in figure 10.
	5	Place the remaining Reversible Disc in
		storage drawer as indicated in figure 11.
	6	Your food processor drawer is now
		properly assembled, as shown in figure 12.

figure 11 figure 12

Storing Your Food Processor

continued

Processing Bowl storage

1Fit the Processor Bowl and Spindle as detailed previously, in figures 1, 2 and 4.

2Place the Variable Slicing blade over the Spindle, see figure 7, and then fit the processing cover to the processing bowl as previously shown in figure 3.

3Place the food pusher in the feed tube.

Cord storage

The power cord can be stored by pushing it into the back of the motor base.

15 16