Wells WV-FGRW operation manual Filters Installation, Filter Installation

Page 16

INSTALLATION (continued)

NOTE:

The GREASE BAFFLE and FILTER PACK activate mechanical switches, and the PRE-FILTER activates a vacuum switch, to verify that the filter elements are in their proper positions.

All filter elements must be properly installed or the cooking appliances will not be energized. Also, the CHECK FILTERS indicator will light.

IMPORTANT:

The filter hook prevents the PRE-FILTER from being drawn in during operation. After installation, press against the top of the filter frame to verify proper engagement of the filter hook over the lip of the top filter rail.

FILTERS INSTALLATION

1.FILTER PACK: Ships installed in the hood. If the FILTER PACK is not in position, the CHECK FILTERS indicator will light.

If the FILTER PACK becomes clogged, the REPLACE FILTER PACK indicator will glow.

To install the FILTER PACK: Position the filter pack with the charcoal portion UP. Slide the filter pack toward the rear of the unit until it contacts the guides on the back panel. Push the filter pack UP into the upper opening until it rests firmly against the filter pack seal. When up in position, holder clips can be snapped over wall ledge on each side. To remove FILTER PACK: Grasp both holder clips and pull INWARD until the clips clear the sidewall ledge. Then, pull the filter pack down and out.

2.PRE-FILTER: The PRE-FILTER ships in the FILTER FRAME. If the PRE-FILTER is not in position, or if the PRE-FILTER is not in the FILTER FRAME, the CHECK FILTERS indicator will light. If the PRE-FILTER becomes clogged, the REPLACE PRE-FILTERindicator will glow.

To install the PRE-FILTER: Pay attention to the air flow markings. The AIR FLOW arrow will point away from the installer. Slide the assembly up into the front opening, behind the upper filter rail.

While pressing slightly against the bottom of the assembly, pull the FILTER HANDLE toward you so as to engage the FILTER HOOK over the lip of the top filter rail. Then lower and seat the assembly into the top indentation of the lower filter rail.

3.GREASE BAFFLE: If the GREASE BAFFLE is not in place, the CHECK FILTERS indicator will glow.

To install the GREASE BAFFLE: Slide the grease baffle up into the indentation of the upper filter rail, then lower and seat it into the bottom indentation of the lower filter rail. Pull toward you and downward to verify the GREASE BAFFLE is properly seated in the lower frame rail.

Fig. 7 Filter Installation

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 507 Important do not Discard this ManualLimited Warranty Statement Specifications Table of ContentsIntroduction Features & Operating Controls Ventilator Section Description CommentVentilator Section Controls & Indicator Lights Ventilator Section Controls Fryer SectionGriddle and Drawer Warmer Sections Griddle Section Optional Drawer Warmer SectionFire Hazard Precautions and General InformationElectric Shock Hazard Burn Hazard Risk DamageHOT Surface Operational Notes Agency Listing InformationSTD Setup InstallationUnpacking & Inspection Electrical Installation Service Technician Installation NotesThis is Responsibility Installer Electric Shock Hazard Fire Suppression System Installation Authority Having JurisdictionFilters Installation Filter InstallationGrease Drip Tray Installation Install Cooking Appliance ComponentsDo not Operate Unless the Grease Drip Tray is Installed Fryer ComponentsVentilator Operation OperationPRE-FILTER Element Using the Griddle Griddle Operation Preparing the Griddle SurfaceSeasoning Standard Griddles Chrome Plated GriddlesFryer Operation Hot SurfaceDrawer Warmer Operation when provided Heating OptionsCleaning Instructions Ventilator Section Cleaning InstructionsCleaning PreparationFryer Section Cleaning Instructions CleaningPreparation FrequencyGriddle Cleaning Instructions PrecautionsElectrical Shock Hazard Heat and Smoke HazardDrawer Warmer Cleaning Instructions PrecautionsFrequency ToolsFryer Disposal of Used OIL Maintenance InstructionsOIL Disposal Fryer Periodic Cleaning Drawer Warmer Adjustments and Lubrication Troubleshooting Suggestions Symptom Possible Cause Recommended RemedyAnsul Health Hazards Page Page Maintenance Schedules Fire HazardDescription Service Parts & Service

WV-FGRW specifications

Wells WV-FGRW is a prominent and innovative water treatment solution designed to meet the evolving demands of water quality and conservation. This state-of-the-art facility is a paradigm of modern engineering, leveraging advanced technologies to ensure that residents and industries alike receive clean, safe, and reliable water supply.

One of the standout features of Wells WV-FGRW is its use of cutting-edge filtration systems. These systems employ multiple stages of filtration, including sand, activated carbon, and membrane filtration, to effectively remove contaminants such as sediments, chemicals, and biological pathogens. This multi-barrier approach not only enhances water purity but also improves the overall taste and odor of the water.

Additionally, the facility integrates real-time monitoring technologies, utilizing sensors and automated data analysis to track water quality parameters continuously. This enables the staff to respond promptly to any fluctuations in water quality, ensuring a swift resolution to potential issues. Such proactive management significantly reduces the risks linked to waterborne diseases and maintains regulatory compliance.

Wells WV-FGRW is also designed with sustainability in mind. Energy-efficient technologies power the treatment processes, minimizing the ecological footprint. Solar panels and other renewable energy sources contribute to a significant portion of the operational energy needs, demonstrating a commitment to environmental stewardship.

Furthermore, the facility employs an advanced chemical dosing system to effectively manage disinfection processes. Utilizing technologies like ultraviolet (UV) light and ozone treatment, the facility achieves an efficient, non-toxic method of disinfecting water, reducing reliance on harsh chemicals.

Another key characteristic of Wells WV-FGRW is its commitment to community involvement and education. The facility frequently conducts workshops and tours for local schools and organizations to raise awareness about water conservation and the importance of maintaining clean water sources.

In conclusion, Wells WV-FGRW exemplifies excellence in water treatment, showcasing an array of modern technologies and a firm dedication to sustainability and community engagement. With its innovative approach to managing water resources, the facility stands as a vital asset for the local community, ensuring a safe and reliable water supply for generations to come.
Top Page Image Contents