Fryer Operation, Hot Surface | Wells WV-FGRW manual

OPERATION

FRYER OPERATION

DANGER: BURN HAZARD

Contact with hot oil will cause severe burns.

Always wear protective clothing and heat resistant gloves when operating the fryer.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

Fig. 3 Temperature Control Knob

Fig. 4 Oil Level Marking

NOTE: If the oil exceeds a safe temperature, the hi-limit safety will shut down the unit and light the red TROUBLE indicator.

To reset:

Allow the oil to cool, then press the red button on the back of the element head until it “clicks” and stays in. If tripping persists, see Troubleshooting Suggestions, page 26.

1.a. Be sure the TEMPERATURE CONTROL KNOB is turned to OFF.

b.Lower the ELEMENT HEAD into the frypot by pushing back on the BASKET SUPPORT ROD, raising the ELEMENT HEAD SUPPORT ROD, then carefully lowering the elements.

2.Fill the FRYPOT with commercial-grade liquid shortening to the MIN OIL line.

Capacity: 15 pounds

IMPORTANT: DO NOT overfill the frypot. Cold oil will expand as it heats. Adding too much oil will allow the frypot to overflow during operation.

For best results, always use top grade commercial shortening made specially for frying. Maintain proper oil level in frypot during operation.

3.Turn the TEMPERATURE CONTROL KNOB to the desired temperature. The HEAT INDICATOR will glow. When the oil reaches the desired temperature, the heat indicator will go out. The heat indicator will go off and on during operation as the thermostat cycles to maintain temperature.

For best results: DO NOT set temperature control to a temperature setting higher than is required for the food product.

4.Load either or both baskets no more than 1/2 full with food product.

a.DO NOT overload fry baskets. For best results, load baskets uniformly to half full.

b.Using the basket handle, lower the baskets into the hot oil.

c.When food is cooked, lift the basket out of the oil by the handle. Hang the baskets on the BASKET SUPPORT ROD to drain.

5.When the heat indicator light cycles off, the fryer is ready to cook the next load.

6.Reduce temperature control to 225ºF during idle periods to save power and extend the life of the oil. The fryer will return to operating temperature in just a few minutes when needed.

7.Keep the fryer clean at all times. Rinse baskets frequently, and dry thoroughly, in order to prevent oil contamination.

8.Drain the frypot completely after use. Filter the oil daily, or more often during heavy use.

WV-FGRW specifications

Wells WV-FGRW is a prominent and innovative water treatment solution designed to meet the evolving demands of water quality and conservation. This state-of-the-art facility is a paradigm of modern engineering, leveraging advanced technologies to ensure that residents and industries alike receive clean, safe, and reliable water supply.

One of the standout features of Wells WV-FGRW is its use of cutting-edge filtration systems. These systems employ multiple stages of filtration, including sand, activated carbon, and membrane filtration, to effectively remove contaminants such as sediments, chemicals, and biological pathogens. This multi-barrier approach not only enhances water purity but also improves the overall taste and odor of the water.

Additionally, the facility integrates real-time monitoring technologies, utilizing sensors and automated data analysis to track water quality parameters continuously. This enables the staff to respond promptly to any fluctuations in water quality, ensuring a swift resolution to potential issues. Such proactive management significantly reduces the risks linked to waterborne diseases and maintains regulatory compliance.

Wells WV-FGRW is also designed with sustainability in mind. Energy-efficient technologies power the treatment processes, minimizing the ecological footprint. Solar panels and other renewable energy sources contribute to a significant portion of the operational energy needs, demonstrating a commitment to environmental stewardship.

Furthermore, the facility employs an advanced chemical dosing system to effectively manage disinfection processes. Utilizing technologies like ultraviolet (UV) light and ozone treatment, the facility achieves an efficient, non-toxic method of disinfecting water, reducing reliance on harsh chemicals.

Another key characteristic of Wells WV-FGRW is its commitment to community involvement and education. The facility frequently conducts workshops and tours for local schools and organizations to raise awareness about water conservation and the importance of maintaining clean water sources.

In conclusion, Wells WV-FGRW exemplifies excellence in water treatment, showcasing an array of modern technologies and a firm dedication to sustainability and community engagement. With its innovative approach to managing water resources, the facility stands as a vital asset for the local community, ensuring a safe and reliable water supply for generations to come.