
Packet mixes | eco button |
The eco bake setting can be used and is recommended for most ready prepared bread mixes. (Wholemeal and Granary bread mixes generally work best on Program 3 Wholewheat).
●Check that the total weight of the mix does not exceed the m aximum amount your bread maker can handle.
●Add the amount of water recommended by the manufacturer to the bread pan first, then add the bread mix.
●For best results use lukewarm water
● If the loaf does not rise sufficiently try adding
●The timer delay is not recommended for packet mixes as you c annot separate the yeast from the liquid.
Visit the Kenwood website for more information about using bread mixes in your bread maker.
Bake only | Program 10 |
The bake only program can be selected on its own and used in the following ways:-
1Use in conjunction with the dough cycle or to lengthen the baking time after completion of one of the other bread programs.
●Wait until the dough cycle or bread program has completed - the bread maker will beep and 0:00 on the display.
●Press the menu button and select program 10.
●Use the Timer buttons and
to select the required baking time from 10 minutes to 90 minutes.
●Press the START/STOP button bq.
2Use to rewarm or crisp loaves already baked and cooled.
●Select program 10 from the MENU.
●Use the Timer buttons and
to select the required baking time from 10 minutes to 90 minutes.
●Press the START/STOP button bq.
The bread maker should not be left unattended when using the Bake only program. Manually stop the program when the desired crust colour has been achieved.
18