Frymaster M2000 manual Prepare fryer for use, Boil out remaining fryers

Page 24

Boil out fry vats (gas fryers only) (continued)

20Prepare fryer for use.

Place the basket support rack in the correct position in the fryer vat. If the fryer has a swivel drain spout, push the spout back inside the fryer cabinet. Carefully roll the filter pan back into the fryer cabinet.

21Turn fryer on.

Turn fryer on.

Press the on/off key to turn the fryer on. The display will show “low temp.”

22Skim oil.

When the oil has heated, skim off any particles of carbon floating on the surface of the oil.

23Season baskets and racks.

Season the baskets and the basket support racks by leav- ing them in the fresh oil for approximately 2 minutes at cooking temperature.

24Boil out remaining fryers.

Repeat steps 1 through 21 for each remaining fryer.

©McDonald’s Corporation · Planned Maintenance Manual · Revised June 2008

Page 5 of 5

Frymaster Fryer All models using an M2000 Computer

Semi-annual

FR 2 S1

Image 24

Contents Weekly maintenance task Bi-weekly maintenance taskMonthly maintenance task Quarterly maintenance tasksFR 2 D1 FR 2 W1 Remove and empty grease trough and cupShut off and disconnect gas Clean area behind fryers Prepare fryer for cleaningClean fryer filters Disconnect fryer from electricityClean area behind fryer Ask manager to inspectWash fryer legs and casters Mop floor around fryerReinstall fryer filters and grease trough Clean area behind other fryersTurn on gas supply Procedure Calibrate pyrometer FR 2 B1Turn on fryer and heat oil Check oil levelCalibrate fryer Procedure Check most recent recovery timeTurn fryer off Calibrate fryer recovery time Adjust fryer, if necessaryCheck recovery time again Recalibrate all remaining fryersFrymaster Fryer All models using an M2000 Computer FR 2 Q1Boil out fry vats electric fryers only Allow solution to heat up Clean fry basketsClean basket support rack Start boil-outDrain solution from fryer Drain solution from vatFill vat with water Rinse and dry vatSkim oil Season baskets and racksBoil-out remaining fryers Procedure Prepare for tests Put fryer into programming modeFR 2 Q2 Decide which vat to testVerify high-limit controls Test the first internal high- limit controlTest second mechanical high-limit control Decide what to do if either control failed Discard oilVerify high-limit controls for all remaining fryers Procedure Prepare fryer for procedure Reinstall filter panFR 2 Q3 Replace O-ringFR 2 S1 Boil out fry vats gas fryers only Start boil-out Drain solution from fryer Boil out remaining fryers FR 2 A1-T Check regulated gas pressureCheck combustion Adjust combustion air blower, if necessary Scratch calibrate fry vats gas fryers onlyScratch calibrate remaining fryers

Related manuals

Manual 30 pages 29.66 Kb

M2000 specifications

The Frymaster M2000 is a state-of-the-art fry cooking solution designed to meet the demands of high-volume commercial kitchens. Known for its efficiency and advanced technology, the M2000 sets a new standard in the frying equipment industry.

At the heart of the Frymaster M2000's appeal is its innovative frying technology. This unit employs a filter management system that helps maintain the quality of the oil over time. The built-in filtration allows users to filter used oil while they continue cooking, significantly extending the life of the oil and ensuring that food is fried to perfection. This not only enhances the flavor of the fried products but also contributes to cost savings in oil usage.

The M2000 is equipped with a powerful heating system that guarantees quick recovery times. This feature is crucial in high-demand environments, as it ensures that cooking times are minimized without sacrificing food quality. The fryer's high BTU ratings allow for rapid heating, which is vital for busy restaurants, bars, and other food service establishments.

Another notable characteristic of the Frymaster M2000 is its user-friendly digital control system. The control interface allows operators to easily set and monitor frying temperatures, cooking times, and oil filtration cycles. This advanced control system also comes with built-in safety features that alert users to any irregularities, thereby ensuring safe and efficient operation.

The construction of the M2000 is robust, featuring a stainless steel body that provides durability and ease of cleaning. Its compact design maximizes kitchen space without compromising its frying capabilities, making it an ideal choice for establishments with space constraints.

Energy efficiency is another key feature of the Frymaster M2000. The fryer is designed to consume less energy while providing superior frying performance, reducing overall operational costs and minimizing the environmental footprint of the kitchen.

In summary, the Frymaster M2000 stands out for its advanced oil filtration system, powerful heating capabilities, user-friendly controls, durable construction, and energy efficiency. It is a reliable and innovative solution for any commercial kitchen looking to enhance its frying operations.