Frymaster H55 operation manual Frymaster domestic warranty

Page 2

frymaster domestic warranty

WHAT IS COVERED

This warranty covers all defects in workmanship and material in all commercial cooking appliances and computer/controller equipment manufactured by Frymaster and sold within the domestic United States, except as excluded below.

WHO IS COVERED

This warranty covers only the original purchaser of Frymaster commercial cooking appliances and computer/controller equipment. This warranty is not trans- ferable. You must have your original sales receipt for warranty coverage.

WHAT WE WILL DO

We will repair or replace the defective appliance, component, or part. Such repair or replacement will be at the expense of Frymaster, LLC; except that travel over 100 miles or two hours, overtime, and holiday charges will be at the expense of the purchaser.

FRYPOT WARRANTY

Stainless steel frypots on all fryers, except as noted below, are warranted against manufacturing defects and/or weld seam failure for the lifetime of the fryer; parts and labor, except after one year, the warranty is limited to replacement parts. Stainless frypots for models listed below are warranted for the length of time indicated.

1 Year

5 Years

7 Years

10 Years

All Cold Rolled

GF14, GF40

H55 (Effective

Pasta Systems

 

 

May 1, 1998)

(Gas and Electric)

 

 

Gas Protector

Rethermalizer

 

 

 

Water Bath Station

 

 

 

(Gas and Electric)

H55 and gas Protector® combustion chamber (infrared burners and structural components to mount the burners) warranted against defective material or workmanship for 7 years, parts and labor.

FENWAL THERMOSTATS

Warranted for two years, parts and labor, except after one year, the warranty is limited to replacement parts.

OTHER PARTS

All other parts components are warranted for one year from the date of purchase (parts and labor).

SHORTENING DISPOSAL UNIT

Warranted for 90 days parts and labor. In addition, the pump is warranted for one year, parts only.

REPLACEMENT PARTS

Parts, 90 days, no labor

Mild steel frypot, 90 days, no labor

Stainless Steel frypots, 1 year, 90 days labor

Computers, 1 year, no labor

HOW TO GET SERVICE

Contact our Authorized Service Agent to obtain warranty service. To find the name and location of the nearest ASA call your dealer, or call the Frymaster Service Hotline, 800-551-8633. You can also go to the Frymaster website, www.frymaster.com, click on Service, click on Locator, key in zip code and it will give you the ASA for that zip code. When calling for service, please furnish the model number, serial number, series code number, voltage of your appliance, and a description of the problem. You must keep your sales receipt for proof of your date of purchase.

WHAT THIS WARRANTY DOES NOT COVER

THE WARRANTIES PROVIDED BY FRYMASTER, LLC DO NOT APPLY IN THE FOLLOWING INSTANCES:

+Damage due to misuse, abuse, alteration, or accident.

+Improper or unauthorized repair.

+Failure to follow installation procedures, operation instructions and/or scheduled maintenance procedures as prescribed in your Frymaster Service and Owner’s Manual.

+Damage in shipment.

+Removal, alteration, or obliteration of the rating plate.

+Changes in adjustment and calibrations after thirty (30) days from equipment installation date.

+Failure to program computer appliances in accordance with programming procedures prescribed in your Frymaster Service and Owner’s Manual.

+Equipment exported to foreign countries.

+Normal maintenance items such as electric bulbs, fuses, gaskets, o-rings, interior and exterior finishes.

+Travel over 100 miles or two hours, overtime or holiday charges; all of which must be paid for by the purchaser.

+Consequential damages (the cost of repairing other property which is damaged), loss of time, profits, use or any other non-fryer related inciden- tal damages of any kind.

GENERAL EXCLUSIONS

No warranty is provided for any Frymaster fryer used in a mobile installation or concession. Warranty protection is only offered for fryers installed in accordance with the procedures described in the Frymaster Service and Owner’s Manual.

There are no implied warranties of merchantability of fitness for any particular use or purpose. This warranty is the only and complete statement with respect to warranties of your commercial cooking appliances and computer/controller equipment manufactured by Frymaster. There are no other documents or oral statements for which Frymaster will be responsible.

www.frymaster.com

Frymaster Domestic

Image 2
Contents Hour Service Hotline Frymaster domestic warranty Canada Iii PRO H55 Series GAS Fryer Table of Contents Applicability and Validity Parts Ordering and Service InformationPRO H55 Series GAS Fryer General Information Safety Information European Community CE Specific InformationDefinitions Installation, Operating, and Service PersonnelEquipment Description Shipping Damage Claim Procedure What to do if your equipment arrives damagedPRO H55 Series GAS Fryer Installation Instructions General Installation RequirementsNational Code Requirements Caster/Leg Installation Mbar = 10,2 mm H2O Non-CE Standard For Incoming Gas Pressures CE Standard Gas Connection Pipe SizesPressure mbar Non-CE Gas Conversion Kits CE Gas Conversion Kits for Units with Gas ValveCE GAS Conversion Instructions PRO H55 Series GAS Fryer Operating Instructions Controller Operation and ProgrammingLighting the Fryer For CE FryersBoiling Out the Frypot Shutting the Fryer DownPRO H55 Series GAS Fryers Filtration Instructions Page Preparation for Use with Filter Paper or Filter Pad Preparation for Use with the Magnasol Filter Assembly Use filter powder with the padPage Snap the optional Power Shower into position Filter Pump Reset Switch Cleaning ReassemblyDraining and Disposing of Waste Oil Using the Optional Rear-Discharge Oil Disposal Daily Checks and Service PRO H55 Series GAS Fryers Preventive MaintenanceFryer Preventive Maintenance Checks and Service Weekly Checks and ServiceClean Filter Pan, Detachable Parts and Accessories Check Computer Magic III.5 Set Point Accuracy Monthly Checks and ServiceAuthorized Service Center for assistance Quarterly Checks and Service Clean Combustion Air Blower AssemblyLeft Viewing Port is Behind Motor Right Check Burner Manifold Pressure SEMI-ANNUAL Checks and ServiceClean Gas Valve Vent Tube Fryer Built-In Filtration System PRO H55 Series GAS Fryers Operator Troubleshooting IntroductionProblem Probable Causes Corrective Action When cooking Fryer is operating Heating indicatorRecovery is slow Sound when burnersTroubleshooting Fryers with Solid State Analog Controller Will not ignite Heating mode light Fryer is slow coming Out of melt cycle Heating mode lightHeating mode light Is on and blower is Normally. BlowerPump stops during Troubleshooting the Built-in Filtration SystemPump won’t start FilteringTransfer takes place Power Shower is notPump starts, but no Or the transfer isMovement is jerky Troubleshooting the Basket LiftBasket lift And/or noisyService Hotline
Related manuals
Manual 48 pages 23.63 Kb Manual 70 pages 22.31 Kb

H55 specifications

The Frymaster H55 is a state-of-the-art commercial fryer that has gained acclaim in the foodservice industry for its advanced technology, efficiency, and exceptional cooking performance. Designed to meet the demanding needs of high-volume kitchens, the H55 stands out for its innovative features and user-friendly design.

One of the standout elements of the Frymaster H55 is its advanced filtration system, which ensures that oil remains clean for longer periods. This not only enhances the quality of the fried food but also extends the life of the frying oil, resulting in cost savings for operators. The automatic filtration system operates seamlessly, reducing the need for manual intervention and ensuring that frying can continue uninterrupted.

Another significant feature of the H55 is its Energy Star certification, which highlights its commitment to energy efficiency. This fryer employs a unique heat transfer design that maximizes energy use while minimizing waste. By utilizing less energy to achieve the same cooking results, the Frymaster H55 helps reduce operating costs and environmental impact.

The H55 also incorporates digital technology, making it easier for chefs to monitor cooking times and temperatures precisely. With adjustable temperature controls, users can achieve consistent frying results regardless of the type of food being prepared. Additionally, the intuitive touchscreen interface allows for easy navigation, even for kitchen staff with limited experience.

The design of the Frymaster H55 allows for versatility in cooking a wide array of menu items, from crispy fried chicken to delicate fish fillets. Its ample cooking capacity ensures that high-demand items can be prepared efficiently without sacrificing quality. Moreover, the H55’s robust construction and high-quality materials contribute to its durability, ensuring it can withstand the rigors of a busy kitchen environment.

Cleanliness and safety are also key priorities for the Frymaster H55. The fryer is equipped with safety features, including over-temperature protection and a drain valve that allows for safe and efficient oil disposal. Its design facilitates quick and thorough cleaning, ensuring that health and safety standards are consistently met.

In summary, the Frymaster H55 is a cutting-edge commercial fryer that embodies efficiency, safety, and innovation. With its advanced filtration system, energy-efficient design, digital controls, and versatility, it is an essential piece of equipment for any high-volume foodservice operation, delivering exceptional frying performance while reducing operational costs.