Frymaster operation manual PRO H55 Series GAS Fryers Filtration Instructions

Page 22

PRO H55 SERIES GAS FRYERS

CHAPTER 4: FILTRATION INSTRUCTIONS

WARNING

The on-site supervisor is responsible for ensuring that operators are made aware of the inherent hazards of operating a hot oil filtering system, particularly the aspects of oil filtration, draining and cleaning procedures.

4.1Draining and Manual Filtering

DANGER

Draining and filtering of cooking oil must be accomplished with care to avoid the possibility of a serious burn caused by careless handling. The oil to be filtered is at or near 350°F (177°C). Ensure all hoses are connected properly and drain handles are in their proper position before operating any switches or valves. Wear all appropriate safety equipment when draining and filtering cooking oil.

DANGER

Allow oil to cool to 100°F (38°C) before draining into an appropriate container for disposal.

DANGER

Do not drain more than one frypot at a time into the built-in filtration unit to avoid overflow and spillage of hot oil.

DANGER

When draining oil into a disposal unit or portable filter unit, do not fill above the maximum fill line located on the container.

If your fryer is not equipped with a built-in filtration system, the cooking oil must be drained into another suitable container. (For safe, convenient draining and disposal of used cooking oil, Frymaster recommends using the Frymaster Shortening Disposal Unit (SDU). The SDU is available through your local distributor.)

1.Turn the fryer power switch to the OFF position. Screw the drainpipe (provided with your fryer) into the drain valve. Make sure the drainpipe is firmly screwed into the drain valve and that the opening is pointing down.

2.Position a metal container with a sealable cover under the drainpipe. The metal container must be able to withstand the heat of the cooking oil and hold hot liquids. If you intend to reuse the oil, Frymaster recommends that a Frymaster filter cone holder and filter cone be used when a filter machine is not available. If you are using a Frymaster filter cone holder, be sure that the cone holder rests securely on the metal container.

3.Open the drain valve slowly to avoid splattering. If the drain valve becomes clogged with food particles, use the Fryer’s Friend (poker-like tool) to clear the blockage.

4-1

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Hour Service Hotline Frymaster domestic warranty Canada Iii PRO H55 Series GAS Fryer Table of Contents PRO H55 Series GAS Fryer General Information Parts Ordering and Service InformationApplicability and Validity Safety Information European Community CE Specific InformationEquipment Description Installation, Operating, and Service PersonnelDefinitions Shipping Damage Claim Procedure What to do if your equipment arrives damagedPRO H55 Series GAS Fryer Installation Instructions General Installation RequirementsNational Code Requirements Caster/Leg Installation Mbar = 10,2 mm H2O Non-CE Standard For Incoming Gas Pressures CE Standard Gas Connection Pipe SizesPressure mbar Non-CE Gas Conversion Kits CE Gas Conversion Kits for Units with Gas ValveCE GAS Conversion Instructions PRO H55 Series GAS Fryer Operating Instructions Controller Operation and ProgrammingLighting the Fryer For CE FryersBoiling Out the Frypot Shutting the Fryer DownPRO H55 Series GAS Fryers Filtration Instructions Page Preparation for Use with Filter Paper or Filter Pad Preparation for Use with the Magnasol Filter Assembly Use filter powder with the padPage Snap the optional Power Shower into position Filter Pump Reset Switch Cleaning ReassemblyDraining and Disposing of Waste Oil Using the Optional Rear-Discharge Oil Disposal Daily Checks and Service PRO H55 Series GAS Fryers Preventive MaintenanceFryer Preventive Maintenance Checks and Service Weekly Checks and ServiceClean Filter Pan, Detachable Parts and Accessories Authorized Service Center for assistance Monthly Checks and ServiceCheck Computer Magic III.5 Set Point Accuracy Quarterly Checks and Service Clean Combustion Air Blower AssemblyLeft Viewing Port is Behind Motor Right Clean Gas Valve Vent Tube SEMI-ANNUAL Checks and ServiceCheck Burner Manifold Pressure Fryer Built-In Filtration System PRO H55 Series GAS Fryers Operator Troubleshooting IntroductionProblem Probable Causes Corrective Action When cooking Fryer is operating Heating indicatorRecovery is slow Sound when burnersTroubleshooting Fryers with Solid State Analog Controller Will not ignite Heating mode light Fryer is slow coming Out of melt cycle Heating mode lightHeating mode light Is on and blower is Normally. BlowerPump stops during Troubleshooting the Built-in Filtration SystemPump won’t start FilteringTransfer takes place Power Shower is notPump starts, but no Or the transfer isMovement is jerky Troubleshooting the Basket LiftBasket lift And/or noisyService Hotline
Related manuals
Manual 48 pages 23.63 Kb Manual 70 pages 22.31 Kb

H55 specifications

The Frymaster H55 is a state-of-the-art commercial fryer that has gained acclaim in the foodservice industry for its advanced technology, efficiency, and exceptional cooking performance. Designed to meet the demanding needs of high-volume kitchens, the H55 stands out for its innovative features and user-friendly design.

One of the standout elements of the Frymaster H55 is its advanced filtration system, which ensures that oil remains clean for longer periods. This not only enhances the quality of the fried food but also extends the life of the frying oil, resulting in cost savings for operators. The automatic filtration system operates seamlessly, reducing the need for manual intervention and ensuring that frying can continue uninterrupted.

Another significant feature of the H55 is its Energy Star certification, which highlights its commitment to energy efficiency. This fryer employs a unique heat transfer design that maximizes energy use while minimizing waste. By utilizing less energy to achieve the same cooking results, the Frymaster H55 helps reduce operating costs and environmental impact.

The H55 also incorporates digital technology, making it easier for chefs to monitor cooking times and temperatures precisely. With adjustable temperature controls, users can achieve consistent frying results regardless of the type of food being prepared. Additionally, the intuitive touchscreen interface allows for easy navigation, even for kitchen staff with limited experience.

The design of the Frymaster H55 allows for versatility in cooking a wide array of menu items, from crispy fried chicken to delicate fish fillets. Its ample cooking capacity ensures that high-demand items can be prepared efficiently without sacrificing quality. Moreover, the H55’s robust construction and high-quality materials contribute to its durability, ensuring it can withstand the rigors of a busy kitchen environment.

Cleanliness and safety are also key priorities for the Frymaster H55. The fryer is equipped with safety features, including over-temperature protection and a drain valve that allows for safe and efficient oil disposal. Its design facilitates quick and thorough cleaning, ensuring that health and safety standards are consistently met.

In summary, the Frymaster H55 is a cutting-edge commercial fryer that embodies efficiency, safety, and innovation. With its advanced filtration system, energy-efficient design, digital controls, and versatility, it is an essential piece of equipment for any high-volume foodservice operation, delivering exceptional frying performance while reducing operational costs.
Top Page Image Contents