Frymaster H55 Shipping Damage Claim Procedure, What to do if your equipment arrives damaged

Page 9

QUALIFIED INSTALLATION PERSONNEL

Qualified installation personnel are individuals, firms, corporations, and/or companies which, either in person or through a representative, are engaged in and are responsible for the installation of gas- fired appliances. Qualified personnel must be experienced in such work, be familiar with all gas precautions involved, and have complied with all requirements of applicable national and local codes.

QUALIFIED SERVICE PERSONNEL

Qualified service personnel are those who are familiar with Frymaster equipment and who have been authorized by Frymaster, L.L.C. to perform service on the equipment. All authorized service personnel are required to be equipped with a complete set of service and parts manuals, and to stock a minimum amount of parts for Frymaster equipment. A list of Frymaster Factory Authorized Service Centers (FASC) is included with the fryer when shipped from the factory. Failure to use qualified service personnel will void the Frymaster warranty on your equipment.

1.8Shipping Damage Claim Procedure

Your Frymaster equipment was carefully inspected and packed before leaving the factory. The transportation company assumes full responsibility for safe delivery upon its acceptance of the equipment for transport.

What to do if your equipment arrives damaged:

1.File a claim for damages immediately, regardless of the extent of damages.

2.Inspect for and record all visible loss or damage, and ensure that this information is noted on the freight bill or express receipt and is signed by the person making the delivery.

3.Concealed loss or damage that was unnoticed until the equipment was unpacked should be recorded and reported to the freight company or carrier immediately upon discovery. A concealed damage claim must be submitted within 15 days of the date of delivery. Ensure that the shipping container is retained for inspection.

Frymaster DOES NOT ASSUME RESPONSIBILITY FOR DAMAGE OR LOSS

INCURRED IN TRANSIT.

1-4

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hour Service Hotline Frymaster domestic warranty Canada Iii PRO H55 Series GAS Fryer Table of Contents Parts Ordering and Service Information PRO H55 Series GAS Fryer General InformationApplicability and Validity European Community CE Specific Information Safety InformationInstallation, Operating, and Service Personnel Equipment DescriptionDefinitions What to do if your equipment arrives damaged Shipping Damage Claim ProcedureGeneral Installation Requirements PRO H55 Series GAS Fryer Installation InstructionsNational Code Requirements Caster/Leg Installation Mbar = 10,2 mm H2O Non-CE Standard For Incoming Gas Pressures Gas Connection Pipe Sizes CE StandardPressure mbar CE Gas Conversion Kits for Units with Gas Valve Non-CE Gas Conversion KitsCE GAS Conversion Instructions Controller Operation and Programming PRO H55 Series GAS Fryer Operating InstructionsFor CE Fryers Lighting the FryerShutting the Fryer Down Boiling Out the FrypotPRO H55 Series GAS Fryers Filtration Instructions Page Preparation for Use with Filter Paper or Filter Pad Use filter powder with the pad Preparation for Use with the Magnasol Filter AssemblyPage Snap the optional Power Shower into position Filter Pump Reset Switch Reassembly CleaningDraining and Disposing of Waste Oil Using the Optional Rear-Discharge Oil Disposal Fryer Preventive Maintenance Checks and Service PRO H55 Series GAS Fryers Preventive MaintenanceDaily Checks and Service Weekly Checks and ServiceClean Filter Pan, Detachable Parts and Accessories Monthly Checks and Service Authorized Service Center for assistanceCheck Computer Magic III.5 Set Point Accuracy Clean Combustion Air Blower Assembly Quarterly Checks and ServiceLeft Viewing Port is Behind Motor Right SEMI-ANNUAL Checks and Service Clean Gas Valve Vent TubeCheck Burner Manifold Pressure Fryer Built-In Filtration System Introduction PRO H55 Series GAS Fryers Operator TroubleshootingProblem Probable Causes Corrective Action Recovery is slow Heating indicatorWhen cooking Fryer is operating Sound when burnersTroubleshooting Fryers with Solid State Analog Controller Heating mode light Is on and blower is Fryer is slow coming Out of melt cycle Heating mode lightWill not ignite Heating mode light Normally. BlowerPump won’t start Troubleshooting the Built-in Filtration SystemPump stops during FilteringPump starts, but no Power Shower is notTransfer takes place Or the transfer isBasket lift Troubleshooting the Basket LiftMovement is jerky And/or noisyService Hotline
Related manuals
Manual 48 pages 23.63 Kb Manual 70 pages 22.31 Kb

H55 specifications

The Frymaster H55 is a state-of-the-art commercial fryer that has gained acclaim in the foodservice industry for its advanced technology, efficiency, and exceptional cooking performance. Designed to meet the demanding needs of high-volume kitchens, the H55 stands out for its innovative features and user-friendly design.

One of the standout elements of the Frymaster H55 is its advanced filtration system, which ensures that oil remains clean for longer periods. This not only enhances the quality of the fried food but also extends the life of the frying oil, resulting in cost savings for operators. The automatic filtration system operates seamlessly, reducing the need for manual intervention and ensuring that frying can continue uninterrupted.

Another significant feature of the H55 is its Energy Star certification, which highlights its commitment to energy efficiency. This fryer employs a unique heat transfer design that maximizes energy use while minimizing waste. By utilizing less energy to achieve the same cooking results, the Frymaster H55 helps reduce operating costs and environmental impact.

The H55 also incorporates digital technology, making it easier for chefs to monitor cooking times and temperatures precisely. With adjustable temperature controls, users can achieve consistent frying results regardless of the type of food being prepared. Additionally, the intuitive touchscreen interface allows for easy navigation, even for kitchen staff with limited experience.

The design of the Frymaster H55 allows for versatility in cooking a wide array of menu items, from crispy fried chicken to delicate fish fillets. Its ample cooking capacity ensures that high-demand items can be prepared efficiently without sacrificing quality. Moreover, the H55’s robust construction and high-quality materials contribute to its durability, ensuring it can withstand the rigors of a busy kitchen environment.

Cleanliness and safety are also key priorities for the Frymaster H55. The fryer is equipped with safety features, including over-temperature protection and a drain valve that allows for safe and efficient oil disposal. Its design facilitates quick and thorough cleaning, ensuring that health and safety standards are consistently met.

In summary, the Frymaster H55 is a cutting-edge commercial fryer that embodies efficiency, safety, and innovation. With its advanced filtration system, energy-efficient design, digital controls, and versatility, it is an essential piece of equipment for any high-volume foodservice operation, delivering exceptional frying performance while reducing operational costs.
Top Page Image Contents