Frymaster E4 manual

Page 2

NOTICE

IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER, FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER.

DANGER

Copper wire suitable for at least 167°F (75°C) must be used for power connections.

DANGER

The electrical power supply for this appliance must be the same as indicated on the rating and serial number plate located on the inside of the fryer door.

DANGER

This appliance must be connected to the voltage and phase as specified on the rating and serial number plate located on the inside of the fryer door.

DANGER

All wiring connections for this appliance must be made in accordance with the wiring diagrams furnished with the equipment. Wiring diagrams are located on the inside of the fryer door.

DANGER

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WARNING

Do not attach accessories to this fryer unless fryer is secured from tipping. Personal injury may result.

WARNING

Frymaster fryers equipped with legs are for permanent installations. Fryers fitted with legs must be lifted during movement to avoid damage and possible bodily injury. For a moveable or portable installation, Frymaster optional equipment casters must be used.

Questions? Call 1-800-551-8633 or email at service@frymaster.com.

WARNING

Do not use water jets to clean this equipment.

WARNING

This equipment is intended for indoor use only. Do not install or operate this equipment in outdoor areas.

i

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Hour Service Hotline RE Series Electric FryersPage Electrical Power Specifications RE Series E4 Electric Fryers Table of Contents RE Series E4 Electric Fryers Replacing Component Box Components GeneralReplacing a Controller Removing the Control Panel Frame and Top Cap Assembly Replacing a Temperature Probe Replacing a High-Limit ThermostatPage Replacing a Heating Element Replacing Contactor Box Components Replacing a Frypot Page Right Sediment Particle Oil Flow Up for reverse Down for forward Disconnect flexlines indicated by the arrows Basket Lift Service Procedures Replacing the Filter Transformer or Filter RelayBINDING/JAMMING Problems Motor and Gear Problems Interface Board Diagnostic Chart Diagnostic LED LegendProbe Resistance Chart Probe Resistance ChartWiring Diagrams Modular Basket Lift Wiring Diagram Modular Basket Lift Wiring Diagram Component Wiring Standard Fryers Component Wiring- Fryer and Half Tilt Switch Wiring Standard Fryer and half Component Wiring Fast Ready Fast Ready Computer Wiring Computer Harness Fast Ready Control Wiring Fast Ready Contactor Delta Configuration Fryer and Half WiringContactor Box WYE Configuration Export Terminal Block Wiring Oil Disposal Wiring Simplified RE14/17/22 Wiring13.12 Series Full VatSimplified RE14/17/22 Series Dual Vat Wiring Electric RE14/17/22 Series FULL-VAT Export 13.14Simplified RE14/17/22 Series Dual Vat Wiring Export WYE Simplified RE14/17/22 Series Full Vat Wiring Epri Simplified RE14/17/22 Series Full Vat Wiring Epri Export WYE RE Series E4 Electric Fryers Parts List AccessoriesBasket Lift Assembly and Associated Parts 106-1805SP Page Single Station Fryer CRS Use 230-0422 for Stainless Steel Bezel, One-Controlleruse 230-1953 for Fryer ½ Cabinets, Bases, Braces, and Associated Parts Component See next section for Drain Valves Euro-Look Drain Tube Sections and Associated Parts PART# ComponentSingle Footprint Full-Vat Drain Valve Assembly 106-6300 Full-Vat Drain Valve Assembly Fryer ½ Compression Washers Page Drain Valves and Assoc. Parts Units with Built-In Filtration Valve, 1.25-inch Non-Filter Full-Vat Drain Electronics and Wiring Components 2.5.1 Component Boxes Component Boxes Page 807-2283 Contactor, 24V Page 807-2283 Contactor Fuse Boxes Cover, RH Fuse Box Used on Single Station Fryers alsoTerminal Blocks Page Heating Element Assemblies and Associated Parts Wire harnesses must2-30 for wire Be replaced whenElement Tube Assemblies Controllers Wiring Contactor Box Wiring Assemblies 12-Pin Dual-Vat C-1 Contactor Box Wiring Assemblies 12-Pin Full-Vat C-1 Contactor Box Wiring Assemblies 6-Pin Left Element Contactor Box Wiring Assemblies 9-Pin Right ElementMain Wiring Harnesses Full and Dual Vat Main Wiring Harnesses Fryer and ½ Component Box, Filter Pump and Basket Lift Wiring Harnesses Page Filtration System Components Roller Kit includes 4 rollers, 4 nuts and 4 lock washers √ Recommended parts Frypot Assemblies and Associated Parts Frypot Assembly does not include Item Oil Return System Components Typical Rear-Flush Oil Return PlumbingOil Return System Components Oil Disposal Plumbing Oil Disposal Wand Wiring Connectors and Pin Connectors Fasteners Service Hotline
Related manuals
Manual 2 pages 51.67 Kb Manual 36 pages 37.47 Kb Manual 78 pages 9.63 Kb

E4 specifications

The Frymaster E4 is an advanced fryer that represents the cutting edge of commercial frying technology. Designed for efficiency and performance, it is favored by restaurants and fast-food chains looking to optimize their cooking processes while maintaining exceptional food quality.

One of the standout features of the Frymaster E4 is its programmable controls. With an intuitive digital interface, operators can easily adjust cooking temperatures, times, and even recipes with just a few taps. This level of precision ensures that food is consistently cooked to perfection every time, reducing waste and improving overall efficiency in the kitchen.

The E4 is equipped with high-performance burners that ensure rapid heating and recovery times. This means that cooking oil reaches the desired temperatures quickly, allowing for faster frying cycles. Thus, busy kitchens can meet high-demand periods without compromising quality or service speed. The fryer also features a high-efficiency oil filtration system that automatically removes contaminants and prolongs the life of the frying oil, resulting in a significant reduction in operating costs over time.

Another notable technology in the Frymaster E4 is its oil level management system, which actively monitors oil levels and alerts the operator when replenishment is necessary. This feature prevents overfilling or underfilling, both of which can negatively impact cooking performance and food quality.

Safety is also a top priority with the E4, as it incorporates features such as a built-in safety shut-off mechanism that activates if the temperature exceeds safe levels. Additionally, the fryer's robust construction minimizes the risks of spills and accidents in the kitchen, making it a reliable choice for high-traffic environments.

The Frymaster E4 also emphasizes energy efficiency, designed to meet stringent energy-saving standards without compromising performance. This is crucial in the current market, where energy costs can significantly impact overall profitability.

In conclusion, the Frymaster E4 offers an impressive combination of innovative technology, safety, and efficiency. Its programmable controls, high-performance frying capabilities, and advanced filtration and oil management systems make it an essential tool for any commercial kitchen aiming to enhance productivity and food quality. As the demands of the food industry continue to grow, the E4 stands out as a reliable partner for chefs looking to elevate their frying operations.
Top Page Image Contents