45 SERIES GAS FRYERS SERVICE AND PARTS MANUAL
CHAPTER 1: SERVICE PROCEDURES
1.1Functional Description
The 45 Series fryers contain a welded steel (stainless or cold rolled) frypot that is directly heated by gas flames that are diffused evenly over its lower surface by ceramic targets.
The flames originate from orifices in a
45 Series Orifice Sizes
Gas | Inches | Millimeters |
Natural | 0.057 | 1.45 |
Propane | 0.034 | 0.86 |
Gas flow to the manifold is regulated by an electromechanical gas valve. This series of fryers is equipped with a
PILOT IGNITION SYSTEM
The pilot ignition system is comprised of the pilot orifice, pilot hood, and a thermopile. The pilot serves two purposes. The first is to light the burner, the second is to heat the thermopile. In opera- tion, the thermopile is in contact with the pilot flame and generates millivolts. The millivolt output passes through a normally closed
|
| ON/OFF |
|
|
| Switch | Line Voltage |
|
|
| |
Controlling Thermostat |
| Line Voltage | |
| 24 VAC | ||
or |
| Main Coil | |
| Transformer | ||
Controller |
| ||
|
| ||
|
|
| |
|
| Gas Valve |
|
|
|
| |
|
|
| Thermostat |
|
| Pilot Coil |
|
| Thermopile |
| |
| Pilot | The Pilot System | |
|
| ||
|
|
|