Frymaster 45 Series manual Component

ITEM PART # COMPONENT

1806-0225SP Deflector (Target) Assembly (use 814-0034 for ceramic only)

2826-1155 Ignitor Kit, Optional Piezo

807-1906	Electrode Assembly
810-1001	Trigger

3823-0496 Manifold, Burner

4 Orifice

	810-0407	Manufactured Gas, 2.15mm (0-1999 Ft)
		Natural Gas
	826-1357	1.45mm (0-1999 Ft) (Pkg of 10)
	826-1386	1.40mm (2000-3999 Ft) (Pkg of 10)
	810-0361	1.36mm (4000-5999 Ft)
	810-0131	1.30mm (6000-7999 Ft)
	812-1301	1.27mm (8000-8999 Ft)
	810-0343	1.25mm (9000-10,000 Ft)
		Propane/Butane Gas
	826-1387	0.86mm (0-1999 Ft) (Pkg of 10)
	810-0952	0.82mm (2000-3999 Ft)
	810-0339	0.81mm (4000-5999 Ft)
	812-0914	0.78mm (6000-7999 Ft)
	812-1302	0.76mm (8000-8999 Ft)
	812-0444	0.74mm (9000-10,000 Ft)
5		Pilot Assembly
	810-1830	Natural Gas, w/Thermopile (non-CE w/twin-leads)
	806-8688SP	Natural Gas, w/Thermocouple (CE w/co-axial lead)
	810-0426	Natural Gas, w/o Thermopile or Thermocouple
	810-0616	Propane or Butane Gas, w/Thermopile (non-CE w/co-axial lead)
	810-1773	Propane or Butane Gas, w/Thermopile (non-CE w/twin leads)
	806-8689SP	Propane or Butane Gas, w/Thermocouple (CE)
	810-0427	Propane or Butane Gas, w/o Thermopile or Thermocouple)
	810-0683	Manufactured Gas, w/Thermocouple (CE and non-CE)

6823-0574 Shield Assembly, Burner Heat

7 Thermopile/Thermocouple

	810-1873	Thermopile w/push-on terminals (used in non-CE Pilot Assemblies)
	826-1527	Kit, Thermocouple with adapter (used in CE Pilot Assemblies)
	812-1284	Thermocouple w/threaded terminal (component of 826-1527)
8		Tube, Pilot Gas
	810-0705	For use with all burner assemblies except Hong Kong export units
	812-0278	For use with Hong Kong export units only
9	810-0691	Tube, Vent
10		Valve, Gas (Non-CE) (see Note 1 below)
*	810-0975	Knob, Gas Valve
	807-3294	Natural Gas (for 240V, use 807-0025)
	807-3295	Propane/Butane Gas (for 240V, use 807-0759)
	807-3354	Manufactured Gas (other than Hong Kong export units)
	810-0353	Manufactured Gas (Hong Kong export units only)
11		Valve, Gas (CE)
	806-6710SP	Natural Gas (see Note 2 below)
	806-6711SP	Propane Gas (see Note 2 below)

* Not illustrated.

NOTES: 1. A gas valve capacitor (P/N 806-4781) is required on gas valves used on units with Thermostat Controllers. 2. An adapter kit (P/N 812-1256SP) is required to connect the high-limit thermostat to Item 11. See Page 2-34 for details.

2-7