Assembly Instructions
For the installer and kitchen expert!
Important installation notes
The connection diagramm is located on the rear panel of the appliance.
|
|
|
| |
L | N |
| ||
|
|
|
| |
|
|
|
|
|
Properly dispose of packaging materials.
Do not use oven door handle for transporting or handling the unit during installation.
WARNING: Connection and first start of the appliance may only be performed by an authorised specialist.
Connection must be made using an H05RR - F 3 G 1,5 mains connection cable.
Rated consumption, rated voltage and type no. of the appliance:
See appliance nameplate behind the oven door to the left beneath the side edge of the oven.
The unit's nameplate is located at on the sidewall of the unit.
Electrical safety of the appliance can be ensured only if the equipment earth in the building installation has been installed according to regulations.
On the installation side a separating device shall be provided. Any switch with a contact gap exceeding 3 mm may be considered a separating device. Other examples are LS switches, fuses and contactors.
In the case of repairs interrupt all power connections to the unit.
The properly installed appliance must be covered on all sides in such a fashion that not even components with rough insulation are exposed to the touch.
The cover must be removable with tools only.
52