Extron electronic DVS 304 D, DVS 304 AD manual Front Panel Features, Input selection buttons

LCD — Displays configuration menus and status information. See the “Menus, Configuration, and Adjustments” section in this chapter for details.

Front Panel Features

The front panel buttons, controls, LCD, and infrared sensor are found on all models of the DVS 304 scaler series. The LEDs beside each input button will light green when the button is pressed.

DVS 304

DIGITAL VIDEO SCALER

					ADJUST
1	2	3	4	MENU	NEXT
					IR

12 3 4 5 6 7

Figure 2-7 — DVS 304 and DVS 304 A front panel

Input selection buttons

A	Input LEDs — The LED of the selected input lights when pressed. A blinking
	LED indicates an audio breakaway input (audio models only).
	Composite input button — Input 1 selects composite video input.
	Composite/YC/component input button — Input 2 selects composite video,
	YC, or component video input.
	S-video input button — Input 3 selects the S-video input.
	Universal input button — Input 4 selects the RGB scaled (RGBHV, RGBS,
	RGsB), RGB pass-through, YUVi, YUVp, S-video and composite video.

Menu navigation buttons

B	Menu button — Use this button to enter and move through the main menu
	system in the DVS 304. See the “Menus, Configuration, and Adjustments”
	section in this chapter for details.
C	Next button — Use this button to step through the submenus in the
	DVS 304 menu system. See the “Menus, Configuration, and Adjustments”
	section in this chapter for details.

LCD menu display and controls

D

E Infrared sensor — This sensor is used to receive infrared (IR) signals from the IR 902 remote control. See the “IR 902 Infrared Remote Control” section in this chapter for details.

F	Adjust horizontal ([) knob — In the menu system, rotate this knob to scroll
	through menu options and make adjustments.
G	Adjust vertical ({) knob — In the menu system, rotate this knob to scroll
	through menu options and make adjustments.

DVS 304 • Installation and Operation 2-9